Welcome, Guest. Please login or register.

Author Topic: help please  (Read 4331 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Franko

  • Hero Member
  • *****
  • Join Date: Jun 2010
  • Posts: 5707
    • Show only replies by Franko
Re: help please
« Reply #14 from previous page: July 17, 2011, 02:52:00 PM »
Quote from: sargeantinio;649995
ok ive disabled evthing except df0 now it's asking me to insert volume df0 in any drive


If you're getting that message then it looks like the floppy disk drive is either broken/ faulty or the cables for it (power and data) may not be connected up properly... :(

If I were you I would open it up and check the floppies cabling to find out if the floppy drive is actually working or not... ;)

I notice from your first post you mention that it does read disks but with errors occurring, this could be (it does happen) down to the small pin switches at the front opening of the floppy drive being dirty...

Sometimes when these disk detection switches get dirty they become intermittent and the vibrations when reading a disk is enough for the switch to lose contact resulting in errors... :(

A little squirt of contact cleaner or WD40 on these switches and pressing and releasing them numerous times is usually all it takes to fix this problem... :)
 

Offline J-Golden

  • TOP SECRET USER!!!
  • Hero Member
  • *****
  • Join Date: Jun 2002
  • Posts: 1325
  • Country: us
  • Gender: Male
    • Show only replies by J-Golden
    • http://about.me/J.Golden
Re: help please
« Reply #15 on: July 17, 2011, 02:53:30 PM »
So Now that I'm "home" from "work", I can get onto Lemonamiga and Lall of Light.  The box cover says you need 1 Meg of ram to play the game.  This would be your Graphics memory, not your Other memory.

So if you are seeing less than 1,000K (1 Meg.) memory, you are going to have a tough time running the game.  If it says something close to 1, then it should work with disabling the Hard Drives...

Also, if you get to upgrading your system, this game is hard drive installable so that would be a bonus to getting the extra Graphics memory...
AMIGA: (NOUN) THE FIRST COMPUTER THAT BRIDGED THE GAP BETWEEN HUMANITY AND TECHNOLOGY.
 

Offline sargeantinioTopic starter

  • Newbie
  • *
  • Join Date: Jul 2011
  • Posts: 17
    • Show only replies by sargeantinio
Re: help please
« Reply #16 on: July 17, 2011, 03:16:15 PM »
ok but could you please try to
give me a step by step guide how to disable hard drive please
imagine your trying to explain it to your mum lol
 

Offline J-Golden

  • TOP SECRET USER!!!
  • Hero Member
  • *****
  • Join Date: Jun 2002
  • Posts: 1325
  • Country: us
  • Gender: Male
    • Show only replies by J-Golden
    • http://about.me/J.Golden
Re: help please
« Reply #17 on: July 17, 2011, 03:24:39 PM »
What I have already given you will disable the Hard Drives.  Did you try disabling everything except for DF0 and CC0?  If you did and you still get the memory crash, they the problem is that the A600 does not have enough memory to run the game. :(

Sorry.

There are things you can buy to upgrade the memory in your A600, but that is a whole other thing to deal with.  Let us know how it all turns out.  IF you are looking for upgrade for it, look around or Google "A600 Amiga upgrade" or something like that.

Good LUCK!
AMIGA: (NOUN) THE FIRST COMPUTER THAT BRIDGED THE GAP BETWEEN HUMANITY AND TECHNOLOGY.
 

Offline Franko

  • Hero Member
  • *****
  • Join Date: Jun 2010
  • Posts: 5707
    • Show only replies by Franko
Re: help please
« Reply #18 on: July 17, 2011, 03:28:15 PM »
Step By Step Guide "Mummy would understand"... :)

If you mean without physically disconnecting the cables then... :)

Reset (or when you power on the Amiga) hold down both mouse buttons until a screen called "Early Startup" appears...

Then click on "Boot Options" (left mouse button)

Now on the screen that's appeared using the left mouse button click on all the items that say "Enabled" to change them to "Disabled" except for the one that says "DF0" (leave that one at "Enabled")

Then click on "Use" and then click on "Boot"

It might also be handy to already have the floppy disk you are going to use already inserted in the floppy disk drive... :)
 

Offline klx300r

  • Amiga 1000+AmigaOne X1000
  • Hero Member
  • *****
  • Join Date: Sep 2007
  • Posts: 3261
  • Country: ca
  • Thanked: 20 times
  • Gender: Male
    • Show only replies by klx300r
    • http://mancave-ramblings.blogspot.ca/
Re: help please
« Reply #19 on: July 17, 2011, 03:42:31 PM »
Quote from: Franko;650003
..A little squirt of contact cleaner or WD40 on these switches and pressing and releasing them numerous times is usually all it takes to fix this problem... :)

don't use WD40 as it's leaves a greasy residue and attracts alot of dust/debris...I've been using Jigaloo (orange can) for quite some time now & it's alot better as it leaves no greasy residue and it smells nicer
____________________________________________________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Indivision AGA & Catweasel MK4+= Amazing
! My Master Miggies-Amiga 1000 & AmigaOne X1000 !
--- www.mancave-ramblings.blogspot.ca ---
  -AspireOS.com & Amikit- Amiga for your netbook-
***X1000- I BELIEVE *** :angel:
 

Offline Franko

  • Hero Member
  • *****
  • Join Date: Jun 2010
  • Posts: 5707
    • Show only replies by Franko
Re: help please
« Reply #20 on: July 17, 2011, 03:51:19 PM »
Quote from: klx300r;650011
don't use WD40 as it's leaves a greasy residue and attracts alot of dust/debris...I've been using Jigaloo (orange can) for quite some time now & it's alot better as it leaves no greasy residue and it smells nicer


Gotta agree with that, WD40 can be rather messy but how many folk have a proper can of contact cleaner in their home... ;)

White spirit can do the trick (though not as effectively) but at least it evaporates totally, slightly more "unusual" but very effective is "Brute" mens deodorant, cleans contacts really well, evaporates totally and give your Amiga (especially when it heats up) a nice smell like it's ready for a night on the tiles... :D
 

Offline sargeantinioTopic starter

  • Newbie
  • *
  • Join Date: Jul 2011
  • Posts: 17
    • Show only replies by sargeantinio
Re: help please
« Reply #21 on: July 17, 2011, 08:33:58 PM »
well thanks guys
after your patience and instructions even my mum could understand lol
i now have been able to load champ manager
im happy:)
 

Offline Cammy

Re: help please
« Reply #22 on: July 18, 2011, 04:27:51 AM »
« Last Edit: July 20, 2011, 10:45:59 AM by Cammy »
A1200 030@28Mhz/2MB+32MB/RTC/KS3.1/IDE-CF+4GB/4-Way Clockport Expander/IndivisionAGA/PCMCIA NIC
A1200 020@14Mhz/2MB+8MB/FPU/RTC/KS3.0/IDE-CF+2GB/S-Video
CD32 020@14Mhz/2MB+8MB/RTC/KS3.1/IDE-CF+4GB
A600 030@30Mhz/2MB+64MB/RTC/IDE-CF+4GB/Subway USB/S-Video/PCMCIA NIC/USB Numeric Keypad+Hub+Mouse+Control Pad
A500 000@7Mhz/512kB+512kB/ROM Switcher/KS3.1+1.3/S-Video

Get AmigaOS
 

Offline sargeantinioTopic starter

  • Newbie
  • *
  • Join Date: Jul 2011
  • Posts: 17
    • Show only replies by sargeantinio
Re: help please
« Reply #23 on: July 18, 2011, 07:17:56 PM »
well thanks for all your help guys
has been very informative:roflmao::hammer:
 

Offline Piru

  • \' union select name,pwd--
  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 6946
    • Show only replies by Piru
    • http://www.iki.fi/sintonen/
Re: help please
« Reply #24 on: July 18, 2011, 08:29:55 PM »
Quote from: Franko;650003
WD40

Say... Have you ever created any maps for Doom?
 

Offline Franko

  • Hero Member
  • *****
  • Join Date: Jun 2010
  • Posts: 5707
    • Show only replies by Franko
Re: help please
« Reply #25 on: July 18, 2011, 08:54:07 PM »
Quote from: Piru;650353
Say... Have you ever created any maps for Doom?


I know you claimed the other day that you do have a sense of humour but that one has completely flew over my head and right out the window !!!