Welcome, Guest. Please login or register.

Author Topic: Free to good home C= 1770 NTSC monitor (UK!)  (Read 1750 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline spiranthoTopic starter

Free to good home C= 1770 NTSC monitor (UK!)
« on: July 13, 2011, 10:17:40 AM »
Yes, that's right, a Commodore 1770 monitor. It's untested, as my step-down only does 100W and this thing is rated at 1.1A (1.1A at 110V = 121VA). As far as I know it works but I've never tried.

I'm willing to ship as long as you pay postage (courier, of course - Royal Mail would be expensive).

If you've got an original A1000 this is probably the monitor you want!
--
Ian Gledhill
ian.gledhill@btinternit.com (except it should be internEt of course...!)
Check out my shop! http://www.mutant-caterpillar.co.uk/shop/ - for 8-bit (and soon 16-bit) goodness!
 

Offline motrucker

Re: Free to good home C= 1770 NTSC monitor (UK!)
« Reply #1 on: July 13, 2011, 05:24:43 PM »
I can't find any reference to a 1770 monitor. Is it a 1070? I never heard of that one ether, but it is listed, and as an A1000 monitor.
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline spiranthoTopic starter

Re: Free to good home C= 1070 110V monitor (UK!)
« Reply #2 on: July 13, 2011, 06:47:53 PM »
Quote from: motrucker;649357
I can't find any reference to a 1770 monitor. Is it a 1070? I never heard of that one ether, but it is listed, and as an A1000 monitor.



Oops, quite right, it's a 1070. Apparently it does PAL    too so should work on a 50Hz supply. Still 110V volts though.
It's dated 1985 by the way, came from an NTSC Amiga 1000.
--
Ian Gledhill
ian.gledhill@btinternit.com (except it should be internEt of course...!)
Check out my shop! http://www.mutant-caterpillar.co.uk/shop/ - for 8-bit (and soon 16-bit) goodness!
 

Offline motrucker

Re: Free to good home C= 1770 NTSC monitor (UK!)
« Reply #3 on: July 14, 2011, 12:55:11 PM »
It's a shame shipping is so much from the U.K. to the U.S.. Otherwise I would jump on it.
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline spiranthoTopic starter

Re: Free to good home C= 1770 NTSC monitor (UK!)
« Reply #4 on: July 14, 2011, 01:03:06 PM »
Quite. Shipping would be about $150 by the way. :)
--
Ian Gledhill
ian.gledhill@btinternit.com (except it should be internEt of course...!)
Check out my shop! http://www.mutant-caterpillar.co.uk/shop/ - for 8-bit (and soon 16-bit) goodness!