A500 A1000 Clockports ?

[TheGoose]

Is there anybody here who is using one of these?

[giZmo350]

I bought one along with the Subway USB controller for my A500. 1st thing is that the clockport sits a tad too high and the keyboard hits the front edge after installation. Since the clockport socket is near the rear of the board, if you press too hard on the keyboard, it will rock the board out of its socket. Second, unless you're going to use WB3.1/3.5/3.9 you need to install the Anaiis USB stack. I simply could not figure out how to get the Anaiis software installed so never got the Subway working on the A500 with WB2.1.

I did also get a ROM switcher so that I could use KS3.1 and the supplied Trident software with the clockport & Subway but I haven't got a 3.1 ROM yet either.

Which brings me to A500 hard drive issues. I have an A590 with only WB2.1 and I keep thinking that it's not worth the time and trouble to install two OS's until the ACA520 comes allowing IDE CF option.

So, at this point, barring some sort of modification so the keyboard doesn't keep popping the clockport board out of it's socket, I'm hoping that Jens gets the ACA520 to market soon.

Rog.....

[TheGoose]

Good info Gizmo. So not such a good fit for A500. Checking out the Anaiis ...

ACA520 -  would be nice. We need to clone Jens S. I think that is the answer to so many of our hardware shortages. There's a joint down the road here, Glaxo Smith Kline? I think they do some cloning.

[giZmo350]

Good info Gizmo. So not such a good fit for A500. Checking out the Anaiis ...
 
ACA520 - would be nice. We need to clone Jens S. I think that is the answer to so many of our hardware shortages. There's a joint down the road here, Glaxo Smith Kline? I think they do some cloning.
 

Yeah, cloning people good, cloning food bad! Ha....
After fiddling around with the clockport in the A500 it occured to me that the clockport should work with no problems in an A2000. So I removed everything from the A500 and checked for fit. Well, seemed like a good idea (other then spending more $$ on a Deneb) but there's too many components in the way to fit the clockport onto the 68K socket. If a guy used about 3 or 4 68K socket risers it would fit great. and would be just as usable as the Deneb.
 
Rog...........

[spihunter]

Is there anybody here who is using one of these?

Hey Goose,

I'm thinking about putting some clock ports on my accordian?. What do you think?

[TheGoose]

I'm all about the clock port.

LOL. What you don't have them installed ?!! How do you live a normal life? :lol:

Well, after conquering my A1000, I'm bored. So this will be my next thing.

A1000 - naked,  no case
KwikStart I - have no idea what rom it does.
And the clock ports.

[spihunter]

I'm all about the clock port.

LOL. What you don't have them installed ?!! How do you live a normal life? :lol:

Well, after conquering my A1000, I'm bored. So this will be my next thing.

A1000 - naked,  no case
KwikStart I - have no idea what rom it does.
And the clock ports.

Man you need more hobby's!. Your just doing this stuff just to do it now!

[Franko]

@ TheGoose

WOODY ALLEN...



It's been bugging me for months now who you reminded me of, I just sat down to have me dinner (Vindaloo with some nan brad) and started to watch one of me old Woody Allen films "Take The Money & Run" when wallop it hit me like a wet fish right across the kisser...

Woody Allen that's who you are, I knew you reminded me of someone or something and there you have it you a world famous comedian...

Now need to get back to me din dins and watch the rest of your movie...

[Franko]

This movie of yours is one of me all time favourites ... it's brilliant ...

[youtube]eY9hy23moXQ[/youtube]

[youtube]vGxFpjlIcMU[/youtube]

[TheGoose]

HEHE, ok Franko you got me!

"Eighty percent of success is showing up." - Woody

And yep, I'm a fan too.

[Gilloo]

I simply could not figure out how to get the Anaiis software installed so never got the Subway working on the A500 with WB2.1.

More easier, you die...
go on aminet, type anaiis and download the anaiis.lha, extract files on a real amiga...
copy bin/anaiis and bin/usbstart and their icons where you want on a disk, and that's all.

If the clockport base address is not 0x00d80001, you should select "Subway" in the  preferences/system tab of ANAIIS program and put the real clockport base address in Param1.

At this step you can use keyboard, mouse, printer (usbprint), paddle (playhid) and disks (massive)

Don't give up :-)

[nicholas]

More easier, you die...
go on aminet, type anaiis and download the anaiis.lha, extract files on a real amiga...
copy bin/anaiis and bin/usbstart and their icons where you want on a disk, and that's all.

If the clockport base address is not 0x00d80001, you should select "Subway" in the  preferences/system tab of ANAIIS program and put the real clockport base address in Param1.

At this step you can use keyboard, mouse, printer (usbprint), paddle (playhid) and disks (massive)

Don't give up :-)

Perhaps adding usbstart to s:s-s too?

[Gilloo]

Perhaps adding usbstart to s:s-s too?

yes, but before you should test the clockport, then if success, put the following into the s:startup-sequence

stack 8000
run >nil: sys:system/usbstart

[nicholas]

yes, but before you should test the clockport, then if success, put the following into the s:startup-sequence

stack 8000
run >nil: sys:system/usbstart

Does Anaiis support the Deneb?

I fancy having a play with it.

[Gilloo]

Does Anaiis support the Deneb?

I fancy having a play with it.

uh no, neither Deneb, nor Algor. Only Highway and Subway (and perhaps thylacine if you put thylacine.usbhcd with the good parameters...) lack of docs, time and so