Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A600 Diskchange problem  (Read 2196 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show only replies by tribz
A600 Diskchange problem
« on: April 16, 2011, 05:05:57 PM »
I have an A600 which I've started using and it has a problem recognising a floppy disk change.

If its started with Workbench 2 in the drive, it can boot from it but doesnt notice a new disk after that.

What could be causing that?
Logged
 

Offline mongo

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 964
    • Show only replies by mongo
Re: A600 Diskchange problem
« Reply #1 on: April 16, 2011, 05:19:58 PM »
Quote from: tribz;632021
I have an A600 which I've started using and it has a problem recognising a floppy disk change.

If its started with Workbench 2 in the drive, it can boot from it but doesnt notice a new disk after that.

What could be causing that?


There's a switch in the drive that is used to detect when a disk is changed. It could be stuck or dirty or broken.
Logged
 

Offline amigakit

Re: A600 Diskchange problem
« Reply #2 on: April 16, 2011, 05:20:36 PM »
In a Shell, and with a disk in the drive type:

diskchange DF0:

What model of disk drive is it?

Chinons usually have jumpers on the rear and early Panasonic have either switches/resistors.
Logged
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show only replies by tribz
Re: A600 Diskchange problem
« Reply #3 on: April 16, 2011, 05:46:41 PM »
Yes, its a Chinon. Tried the diskchange command but didnt work presumably because Workbench wasnt in DF0:

Will take the top of the floppy and see if I can see anything obvious.

Quite a few of the keys are also reversed when typing (q & a for example), presume thats just a keyboard layout or could it be a sign of a faulty keyboard?
Logged
 

Offline ognix

  • Sr. Member
  • ****
  • Join Date: Oct 2004
  • Posts: 256
    • Show only replies by ognix
Re: A600 Diskchange problem
« Reply #4 on: April 16, 2011, 09:31:08 PM »
Quote from: tribz;632030

Yes, its a Chinon. Tried the diskchange command but didnt work presumably because Workbench wasnt in DF0:

Will take the top of the floppy and see if I can see anything obvious.

Quite a few of the keys are also reversed when typing (q & a for example), presume thats just a keyboard layout or could it be a sign of a faulty keyboard?


Hi!
The command DiskChange stays in C directory in SYS: volume (Workbench in your case).
If you want to use it without diskette inside copy it to RAM:

From CLI/Shell:
copy c/diskchange to ram:
path ram: add

For the keyboard, if it's just 'Q' vs 'A' and maybe 'L' also, it should be just AZERTY layout (used in France, if not wrong).
Change keymap...

For the floppy check this thread (my hint - had a similar problem):
http://www.amiga.org/forums/showthread.php?t=55020

BY and let us know!
Logged
 

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show only replies by tribz
Re: A600 Diskchange problem
« Reply #5 on: April 18, 2011, 07:20:37 PM »
Thanks, will get the old girl out again this weekend and try the various suggestions.
Logged
 
Pages: [1]   Go Up
« previous next »