Welcome, Guest. Please login or register.

Author Topic: FS: Invidision AGA for 4000D/CD32  (Read 2246 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline dkedrowTopic starter

  • Newbie
  • *
  • Join Date: Feb 2007
  • Posts: 38
    • Show only replies by dkedrow
FS: Invidision AGA for 4000D/CD32
« on: March 11, 2011, 05:30:30 AM »
Like new with original box and manual, and I attached the VGA cable to a cover plate to mount properly.  FPGA firmware version 1.5.  Works great!

I don't believe there are any of these left for sale new, so these are probably getting hard to find.  I've attached a picture of it installed in my 4000 just before removing it.

$175 + shipping, PayPal payment preferred.

Thanks!
 

Offline stachu100

  • Sr. Member
  • ****
  • Join Date: Aug 2009
  • Posts: 292
    • Show only replies by stachu100
Re: FS: Invidision AGA for 4000D/CD32
« Reply #1 on: March 11, 2011, 05:52:03 AM »
Hi,
I'm interested to buy it, but with slightly low price.
PM me if you are interested.
 

Offline Xanxi

  • Hero Member
  • *****
  • Join Date: Aug 2005
  • Posts: 900
    • Show only replies by Xanxi
Re: FS: Invidision AGA for 4000D/CD32
« Reply #2 on: March 11, 2011, 07:24:54 AM »
Hi.
Is the lower zorro slot still usable with the Indi A4000? Seems not on your pic.
I was not aware of this problem until now.
10 Classic Amiga Computers so far: I have too many computers!!
 

Offline Ratte

  • Sr. Member
  • ****
  • Join Date: Sep 2006
  • Posts: 380
  • Country: de
    • Show only replies by Ratte
Re: FS: Invidision AGA for 4000D/CD32
« Reply #3 on: March 11, 2011, 09:03:07 AM »
Quote from: Xanxi;621095
Hi.
Is the lower zorro slot still usable with the Indi A4000? Seems not on your pic.
I was not aware of this problem until now.


No problem.
All Zorro-Slots are usable.
http://www.a1k.org/forum/showpost.php?p=233364&postcount=27
 

Offline dkedrowTopic starter

  • Newbie
  • *
  • Join Date: Feb 2007
  • Posts: 38
    • Show only replies by dkedrow
Re: FS: Invidision AGA for 4000D/CD32
« Reply #4 on: March 11, 2011, 11:34:39 AM »
Oh yes, there is plenty of room.

Quote from: Xanxi;621095
Hi.
Is the lower zorro slot still usable with the Indi A4000? Seems not on your pic.
I was not aware of this problem until now.
 

Offline Xanxi

  • Hero Member
  • *****
  • Join Date: Aug 2005
  • Posts: 900
    • Show only replies by Xanxi
Re: FS: Invidision AGA for 4000D/CD32
« Reply #5 on: March 11, 2011, 11:43:45 AM »
But where goes the vga bracket when every slot is occupied?
10 Classic Amiga Computers so far: I have too many computers!!
 

Offline dkedrowTopic starter

  • Newbie
  • *
  • Join Date: Feb 2007
  • Posts: 38
    • Show only replies by dkedrow
Re: FS: Invidision AGA for 4000D/CD32
« Reply #6 on: March 11, 2011, 11:51:40 AM »
You don't have to mount the VGA port in the metal bracket, you can just hang it out the back since the lowest opening is actually wider then the rest for a video toaster.  I had my Deneb mounted in that zorro slot with a USB bracket in the same spot and the VGA cable fit out next to it just fine.  I later found the nice bracket and moved the Deneb to the top.


Quote from: Xanxi;621127
But where goes the vga bracket when every slot is occupied?
 

Offline fitzsteve

Re: FS: Invidision AGA for 4000D/CD32
« Reply #7 on: March 11, 2011, 11:53:58 AM »
Quote from: Xanxi;621127
But where goes the vga bracket when every slot is occupied?

The VGA bracket isn't supplied normally with the Indivision, you could always use one of the other blank expansion bays on the back of the A4000.
 
Also not all Zorro cards make use of the rear slots, i.e Buddha IDE - so you'd still have a spare slot for the VGA bracket if indeed you decided to use it :)
 
@dkedrow
 
Good luck with the sale
 
Steve.
« Last Edit: March 11, 2011, 11:58:39 AM by fitzsteve »
 

Offline dkedrowTopic starter

  • Newbie
  • *
  • Join Date: Feb 2007
  • Posts: 38
    • Show only replies by dkedrow
Re: FS: Invidision AGA for 4000D/CD32
« Reply #8 on: March 11, 2011, 03:20:22 PM »
Sold!