Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: 1 [2]   Go Down

Author Topic: A2000 CD-ROM with A2091  (Read 5985 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Astra DanTopic starter

  • Newbie
  • *
  • Join Date: Feb 2011
  • Posts: 13
    • Show only replies by Astra Dan
Re: A2000 CD-ROM with A2091
« Reply #14 from previous page: January 07, 2018, 11:55:38 AM »
Quote from: save2600;834781
I'm using a SCSI CD-ROM drive just fine with my 6.6 ROM'd A2091...


Could you tell me how you got it to work please? :)
Logged
A500+ 2 Meg
A500   1 Meg
A2000HD 3 Meg
A1200
CDTV x2
CD32 (Broken)
C64 SD2IEC
 

Offline mechy

Re: A2000 CD-ROM with A2091
« Reply #15 on: January 07, 2018, 06:44:48 PM »
Quote from: Astra Dan;834789
Could you tell me how you got it to work please? :)




Just get ASIMcdfs 3.10 if possible, it will be your easiest,turn key install of a cd filesystem and will work with your combination fine.
you just need to know what device you have the cdrom set to during the install.
Logged
 

Offline mechy

Re: A2000 CD-ROM with A2091
« Reply #16 on: January 07, 2018, 06:52:52 PM »
Quote from: Oldsmobile_Mike;834783
This is a very old thread, but AFAIR 7.0 was required to use devices with LUN's (like SCSI card readers).  Mechy or someone like that would know for sure.  ;)

LUNs worked on older roms mostly,i think rev7 was bug fixes etc but its always good to have the latest roms. the 6.6 rom and up was pretty good. It does amaze me so many people are still using old buggy roms instead of upgrading, they are so cheap and or you can make your own eproms nearly free if you have the burner.
Logged
 

Offline Oldsmobile_Mike

Re: A2000 CD-ROM with A2091
« Reply #17 on: January 07, 2018, 07:43:10 PM »
Quote from: mechy;834800
It does amaze me so many people are still using old buggy roms instead of upgrading, they are so cheap and or you can make your own eproms nearly free if you have the burner.

:hammer:
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline Astra DanTopic starter

  • Newbie
  • *
  • Join Date: Feb 2011
  • Posts: 13
    • Show only replies by Astra Dan
Re: A2000 CD-ROM with A2091
« Reply #18 on: January 07, 2018, 11:15:41 PM »
Quote from: mechy;834800
LUNs worked on older roms mostly,i think rev7 was bug fixes etc but its always good to have the latest roms. the 6.6 rom and up was pretty good. It does amaze me so many people are still using old buggy roms instead of upgrading, they are so cheap and or you can make your own eproms nearly free if you have the burner.


I have a burner, could you point me in the right direction please? :-)
Logged
A500+ 2 Meg
A500   1 Meg
A2000HD 3 Meg
A1200
CDTV x2
CD32 (Broken)
C64 SD2IEC
 

Offline mechy

Re: A2000 CD-ROM with A2091
« Reply #19 on: January 08, 2018, 12:06:44 AM »
Quote from: Astra Dan;834811
I have a burner, could you point me in the right direction please? :-)

try this for the 7.0roms:
eab.abime.net/attachment.php?attachmentid=16984&d=1214765066

makecd 3.2D is latest burning software i think, it can be found here:
http://www.estamos.de/makecd/
Logged
 

Offline mechy

Re: A2000 CD-ROM with A2091
« Reply #20 on: January 08, 2018, 12:08:50 AM »
Quote from: mechy;834800
LUNs worked on older roms mostly,i think rev7 was bug fixes etc but its always good to have the latest roms. the 6.6 rom and up was pretty good. It does amaze me so many people are still using old buggy roms instead of upgrading, they are so cheap and or you can make your own eproms nearly free if you have the burner.

6.6 roms had no support for over 1GB partitions iirc,using sfs or pfs got around this.
Logged
 
Pages: 1 [2]   Go Up
« previous next »