DRAM ZIP ADAPTERS SOLVE IC END-OF-LIFE PROBLEMS on a3000 ?

[amigamad]

DRAM ZIP Adapter Modules convert a DRAM packaged in a surface mount SOJ or TSOP package into a vertically mounted ZIP configuration. These DRAM ZIP Adapters Modules were developed for users with motherboard designs that require IC?s, which are now obsoleted by major manufacturers.

could these be used  on an amiga 3000 the link is here

zip ram converter

[voxel]

Hi AmigaMad :-)

Just requested some more informations on it :-)

BTW, IF it is not too thick, large and tall ;-) AND available in 1M*4 form, so perhaps ;-)

A3000s and Ts takes 256K*4 or 1M*4 zip chips either Page Mode or Static Column mode (preferred) in 80ns or better speeds.

However, it are very close together on the motherboards, so the size factor will mather :-)

amigalement,
Jean-François, Amiag ONLY since 1985.

[patrik]

Well, if they doesnt fit there is always the possibility to use a ZIP-to-SIMM converter which should be a cheap solution.


/Patrik

[machinehead]

http://www.accutekmicro.com/pdf/DRAM%2DZIP%2DAdapters%2Epdf
This is the link to the dimensions of these adaptors. The thickness is indicated to be 1/10th of an inch.
Dave

[jeffimix]

I'll try to remember this if my Retina craps out... now I wonder if it has 2 or 4 megs RAM... mmm

ED: More things than just an A3000 used Zip Chips.

[x56h34]

Man, it sure would be nice if these would work in A3000. Does anyone know?

[Iggy_Drougge]

jeffimix wrote:

ED: More things than just an A3000 used Zip Chips.

Quite true. Apart from Amiga designs, does anyone have any tips on where to find ZIPs for scrounging?

Here are my two finds:
* Multi-serial boards for HP Laserjet printers (MIO bus)
* Certain Thomas-Konrad network/telephony equipment

[Ilwrath]

The thickness is indicated to be 1/10th of an inch.

I think that's the size without an actual chip on it, though.   From the description, it calls this an adaptor, and I don't think it's sold with DRAM attached.

It would certainly be a tight fit in an A3000.  If you only needed 8 megs, though, you could probably use banks 1 and 3.  That would leave quite a bit of space.

[amigamad]

Would be great to upgrade my a3000 it only has 6 meg of memory.