ICD Flicker Fixer Video 2

[McTrinsic]

Hi all,

if anyone is owning and remebering something about the

ICD Flicker Fixer Video 2

I'd be glad if (s)he could help me a bit. I have recently bought this thing on ebay and have installed it yesterday. The original video-port of the Amiga still works. and displays everything fine.

But I have NO idea what the jumpers are actually for, since the video signal is ALWAYS displayd. I though one of the jumpers would disable the original video signal?

Second, the beauty came with a 9-pin d-sub female connector. My VGA monitor has a  15-pin - male connector. Do I need some special cable or what? Which pins need to connect to which???

I'm puzzled. :-?
If you can, please help me.


Have fun,
McTrinsic

[patrik]

The CLIP-jumper should be closed if you have an ECS Denise.

The BYPASS-jumper can be attached to a switch to be able to choose if the flickerfixer shall "flickerfix" the image or send the standard video-signal through unaltered (to the DSUB-9). You wont be able to disable to original video-signal from the 23-pin RGB-port and there would be no point in doing so anyhow...

Pinout-conversion-table (this will look a bit wierd, when submitted) :

DB15-VGA: DB9-VGA: Signal-name:
1 1 Red
2 2  Green
3 3 Blue
4 - ID 2
5 9 NEC Self Test
6 6 Red Ground
7 7 Green Ground
8 8 Blue Ground
9 - -
10 9 Digital Ground
11 - ID 0
12 - ID 1
13 4 Horizontal Sync
14 5 Vertical Sync
15 - -

Computer shops usually can get you a adapter for this.


/Patrik

[McTrinsic]

WOW!

Thanks a LOT!

*hugs*


Have fun,
McTrinsic