Welcome, Guest. Please login or register.

Author Topic: prism2.device and Miami Dx can work...  (Read 2894 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline TheGooseTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
prism2.device and Miami Dx can work...
« on: January 18, 2011, 04:30:43 PM »
Nearly got my WiFi card working in my A1200T. I'm having a problem with the computer freezing up when I try to connect the stack.

I think I read somewhere there is a conflict with prism2.device and Subway, maybe on the English board? Not sure. I have a Subway in the machine, but it not started automatically on boot up. I have to trigger the Posiden software.

Any thoughts on prism2.device and Miami, ?? appreciated.

(could go either in software or hardware forums, don't know yet...)
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +
 

Offline doctorq

  • Hero Member
  • *****
  • Join Date: Aug 2003
  • Posts: 2082
    • Show only replies by doctorq
Re: prism2.device and Miami Dx can work...
« Reply #1 on: January 18, 2011, 05:17:23 PM »
prism2.device and Miami DX works just fine. Have been using it for a couple of years on my A1200T setup.
 

Offline TheGooseTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
Re: prism2.device and Miami Dx can work...
« Reply #2 on: January 18, 2011, 05:50:30 PM »
Quote from: doctorq;607453
prism2.device and Miami DX works just fine. Have been using it for a couple of years on my A1200T setup.


Right, but I'm after info about why it is hanging my system up...
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +
 

Offline TheGooseTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
Re: prism2.device and Miami Dx can work...
« Reply #3 on: January 19, 2011, 12:29:34 AM »
Ok, I'm not alone at least, this sounds very much like my "freeze":

http://www.amiga.org/forums/showthread.php?t=20912&page=3

But there was no solution there so I'll keep going...
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +
 

Offline ncafferkey

  • Sr. Member
  • ****
  • Join Date: Feb 2003
  • Posts: 387
    • Show only replies by ncafferkey
Re: prism2.device and Miami Dx can work...
« Reply #4 on: January 19, 2011, 01:56:27 PM »
I have a Subway in my A1200, and it doesn't seem to interfere with my wireless cards. The user in the thread you linked concluded that it was a hardware fault.
 

Offline mfilos

  • Hero Member
  • *****
  • Join Date: Aug 2005
  • Posts: 662
    • Show only replies by mfilos
    • http://mfilos.blogspot.com/
Re: prism2.device and Miami Dx can work...
« Reply #5 on: January 19, 2011, 02:40:02 PM »
There is no issue with Subway and prism2.device since I have been using those 2 (Subway+prism2.device) under Genesis in OS3.9 and under AmiTCP in OS3.1 and worked with no issue.

Do you have CardReset and CardPatch in your Startup-Sequence?
Visit my Amiga blog here
- A600: Vampire V3, 128MB, A604n, 16GB CF, Indivision ECS, RapidRoad, MAS-Player + Custom Audio Mixer (internal), HxC SD + Slim floppy (internal)
 

Offline TheGooseTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
Re: prism2.device and Miami Dx can work...
« Reply #6 on: January 19, 2011, 05:48:30 PM »
Quote from: mfilos;607629
There is no issue with Subway and prism2.device since I have been using those 2 (Subway+prism2.device) under Genesis in OS3.9 and under AmiTCP in OS3.1 and worked with no issue.

Do you have CardReset and CardPatch in your Startup-Sequence?


Worked on it last night, yes I do have those and they work with the card fine. Every time I put in prism2.device and click 'Continue' or 'Online' , Miami it just freezes the whole machine.

But, one session it behaved normal and I was able to use the 'query device' option and got the MAC address and everything. Saved the config.

Really frustrating, no error, no nothing, just doesn't work.
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +
 

Offline tone007

Re: prism2.device and Miami Dx can work...
« Reply #7 on: January 19, 2011, 07:16:33 PM »
Don't know if it would make any difference, but did you throw the prism2 setup string with your WiFi network SID and key into your startup sequence?
3 Commodore file cabinets, 2 Commodore USB turntables, 1 AmigaWorld beer mug
Alienware M14x i7 laptop running AmigaForever
 

Offline TheGooseTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
Re: prism2.device and Miami Dx can work...
« Reply #8 on: January 19, 2011, 08:25:25 PM »
Quote from: tone007;607690
Don't know if it would make any difference, but did you throw the prism2 setup string with your WiFi network SID and key into your startup sequence?


I have done that, and wonder if my SetPrism2Defaults is causing trouble?

Then sometimes I comment it out, and do it from CLI for trial and error purposes. I just hope the 12 bucks one coming works better.

I know the PCMCIA slot is okay, I have used it with a wired ethernet card many times with cnet.device.
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +
 

Offline tone007

Re: prism2.device and Miami Dx can work...
« Reply #9 on: January 19, 2011, 09:03:46 PM »
Actually, this is ringing a bell, the very first card I got was a Netgear, I believe, and it did the same thing on my A1200.  I tested it in a PC laptop and it didn't work there either, so I figured the card was broken.
3 Commodore file cabinets, 2 Commodore USB turntables, 1 AmigaWorld beer mug
Alienware M14x i7 laptop running AmigaForever
 

Offline TheGooseTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
Re: prism2.device and Miami Dx can work...
« Reply #10 on: January 19, 2011, 09:10:28 PM »
I guess a trip over to the crapbuntu machine is in order...
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +
 

Offline TheGooseTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
Re: prism2.device and Miami Dx can work...
« Reply #11 on: January 23, 2011, 02:59:52 AM »
Quote from: tone007;607708
Actually, this is ringing a bell, the very first card I got was a Netgear, I believe, and it did the same thing on my A1200.  I tested it in a PC laptop and it didn't work there either, so I figured the card was broken.


Well it's working! The old card I was using was crap, and is now safe and sound in cat little box. I had to use WEP and downgrade the wireless to just b/g and then it all came to life. It looks like hell but the connection is pretty zippy. Only thing I had on the machine was Aweb SE.

But hell it's a wireless Amiga! I am using a Orinoco Gold 802.11b Wireless PC Card I got for $12.00 off of Amazon!
« Last Edit: January 23, 2011, 03:05:07 AM by TheGoose »
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +
 

Offline runequester

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
Re: prism2.device and Miami Dx can work...
« Reply #12 on: January 23, 2011, 04:31:50 AM »
Quote from: TheGoose;608399
Well it's working! The old card I was using was crap, and is now safe and sound in cat little box. I had to use WEP and downgrade the wireless to just b/g and then it all came to life. It looks like hell but the connection is pretty zippy. Only thing I had on the machine was Aweb SE.

But hell it's a wireless Amiga! I am using a Orinoco Gold 802.11b Wireless PC Card I got for $12.00 off of Amazon!


Very awesome :)

Whats the specs of your 1200?
 

Offline TheGooseTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 1458
  • Country: us
  • Gender: Male
    • Show only replies by TheGoose
    • http://www.amiga.org/forums/blog.php?u=827
Re: prism2.device and Miami Dx can work...
« Reply #13 on: January 23, 2011, 02:47:11 PM »
Quote from: runequester;608401
Very awesome :)

Whats the specs of your 1200?


Well it's pretty much to the max:

A1200T AOS3.9 (Power Tower case)
Blizzard 603e+ PPC with B-Vision 68040 25Mhz PPC 200Mhz
128 MB RAM
Subway USB
Mediator PCI bus board
PCMCIA WiFi card
4 device IDE interface
80 Gig Maxtor HD, CDROM
Microdeal AMAS (Advanced MIDI Amiga Sampler)
G1200, A3000D, A1200 PPC AOS4.0C

I\'m on Google +