AmigaOS 3.9 BoingBag #4

[TheBilgeRat]

Gulliver - Haalp!

[Gulliver]

The lines of contention are (currently I have them commented out):

SYS:C/ FailAt 21
SYS:C/LoadResident >NIL DEVS:card.resource
SYS:C/LoadResident >NIL DEVS:misc.resource
SYS:C/LoadResident >NIL DEVS:trackdisk.device
SYS:C/LoadResident >NIL L:ramlib
SYS:C/FailAt 20

If I boot with these uncommented the error reads "FailAt: unknown command"
If I comment that line out it says "LoadResident: unknown command"

Have you check that you actually have LoadResident in C: ?

Most of the time these kind of issues come up, it is always related to some human error while adding those text lines, and omitting a space, or wrongly spelling something.

Please check your BBag installation again, I am not home right now, but will try to help you when I get there (I have my Amiga setups at home).

[TheBilgeRat]

Have you check that you actually have LoadResident in C: ?

Most of the time these kind of issues come up, it is always related to some human error while adding those text lines, and omitting a space, or wrongly spelling something.

Please check your BBag installation again, I am not home right now, but will try to help you when I get there (I have my Amiga setups at home).

That's the deal - no LoadResident in C: .

oh and fer sure its def human error  most likely mine

[paul1981]

This is off topic, so I apologise in advance....but I notice one of the patches that this new graphics library replaces was called "AmyWarp".  I'm unable to find this on aminet.  Can anyone tell me what this patch is or where to get it from?
Thanks a lot.

[TheBilgeRat]

I found a copy of LoadResident in RemAPollo on aminet.  Yanked just it out and will put it in C and see where I am from there.

EDIT:  Seemed to work a treat!  I guess I am good to go.

no SYS:C/FailAt X, just FailAt x

[Gulliver]

I found a copy of LoadResident in RemAPollo on aminet.  Yanked just it out and will put it in C and see where I am from there.

EDIT:  Seemed to work a treat!  I guess I am good to go.

no SYS:C/FailAt X, just FailAt x

I am glad it is working.

Now enjoy it

[HammerD]

Yes, of course, you will have more colours. It requires icon.library 46.4.204 and two other libraries (zlib.library and pngalpha.library), all present in the new BB4 0.8n.

Thanks, I installed BB4 from your website and the icons are displaying properly, however there is still a large amount of banding - indicating they are not using alot of colours.  I'm using a mediator 4000di and Radeon 9250 at 16-bit, 1024x768 resolution.

Any prefs or setting I have to adjust?

BTW, thanks for BB3/4 and all your work :-)

Too bad we couldn't have a full new ISO made for OS 3.9.

[Gulliver]

Thanks, I installed BB4 from your website and the icons are displaying properly, however there is still a large amount of banding - indicating they are not using alot of colours.  I'm using a mediator 4000di and Radeon 9250 at 16-bit, 1024x768 resolution.

Any prefs or setting I have to adjust?

BTW, thanks for BB3/4 and all your work :-)

Too bad we couldn't have a full new ISO made for OS 3.9.

At this point, icon.library is still being finetuned by Peter Kneucke, so if you see too much banding, you should post a screengrab  and post it over here (http://eab.abime.net/showthread.php?t=57885&page=3) so that PeterK solves any issues.

I am glad you are happy with BB3 and 4

I also wish we could build an updated ISO, but then the copyright status of AmigaOS 3.9 is really complicated (Amiga Inc (?) + Haage&Partner + AmiTCP/Genesis piracy claims).  

[TheBilgeRat]

I'm not too sure what the banding means or is, but I do notice some corruption occasionally when moving Icons around or upon closing programs.  There will be a rainbow colored blotch or a line across the screen.  Cleaning up resolves it.

[Gulliver]

I'm not too sure what the banding means or is, but I do notice some corruption occasionally when moving Icons around or upon closing programs.  There will be a rainbow colored blotch or a line across the screen.  Cleaning up resolves it.

For what its worth, I only experience that same gfx corruption under WinUAE, not on my real A1200.

[TheBilgeRat]

For what its worth, I only experience that same gfx corruption under WinUAE, not on my real A1200.

Weird - this is on a real life A4000...

[HammerD]

At this point, icon.library is still being finetuned by Peter Kneucke, so if you see too much banding, you should post a screengrab  and post it over here (http://eab.abime.net/showthread.php?t=57885&page=3) so that PeterK solves any issues.

I am glad you are happy with BB3 and 4

I also wish we could build an updated ISO, but then the copyright status of AmigaOS 3.9 is really complicated (Amiga Inc (?) + Haage&Partner + AmiTCP/Genesis piracy claims).  

Thanks I posted with a screenshot to the thread on the English Amiga Board.

Darren

[Gulliver]

Thanks I posted with a screenshot to the thread on the English Amiga Board.

Darren

You forgot to mention on your post over EAB that you are running workbench in 16bits
Otherwise on low colour workbenches that banding would probably seem normal.

[HammerD]

You forgot to mention on your post over EAB that you are running workbench in 16bits
Otherwise on low colour workbenches that banding would probably seem normal.

Oops, right.  I updated the post Thnx.

[Gulliver]

BoingBag #4 v0.9m - Minor update

Changes between V0.9k and V0.9m:
    * Adjusted startup-sequence modification instructions.
    * Upgraded icon.library from 46.4.228 to 46.4.251.
    * Upgraded dos.library to latest version.
    * Fixed Genesis icons.

Available at:

http://amigan.1emu.net/releases/
http://lilliput.amiga-projects.net/bbag4.htm

[matthey]

@Gulliver
Thanks for the update. Good to see you are still going .