FS: VeryFast A2000/60 !!!

[m4rk1z]

This is a c/p from another site...

It's a white Amiga 2000 in a custom made/moded PC case, with a
white amiga keyboard (only the keyboard price was about 70e) &
a Amiga 1200 mouse. Sorry for pure pictures but my htc only
makes good ones at daylight ;-(
Also inside the original 1.3rom & the latest 3.1roms!
In the space between the cd roms is a rack for a IDE hdd already
connected to the controller but i lost somehow the rack ;-(

This image has been resized. Click this bar to view the full image. The original image is sized 1248x832.

This image has been resized. Click this bar to view the full image. The original image is sized 1248x832.

Blizzard 2060 68060/50mhz turbo card with Fast SCSI-II DMA Controller
I remember overclocking it to 66mhz but not sure (that was 15 years ago)
I will open it and make pictures if someone is very serious about
buying it - no problems!!!

Also there is a Piccasso II card installed (with 2mb video memory)

This image has been resized. Click this bar to view the full image. The original image is sized 1248x832.

As you can see i played doom and quake with good FPS
;p

Click this bar to view the full image.

Also inside is a Oktagon - bootable IDE controller with a 2.1gb hdd.

This image has been resized. Click this bar to view the full image. The original image is sized 1248x832.

and on the cpucard i have a 730mb scsi NEC hdd
also inside i have a CD rom and a TEAC 8xcd writer (both scsi) you can
see the makeCd registration here it shows my screennam!!!

This image has been resized. Click this bar to view the full image. The original image is sized 1248x832.

and here is the speed test

This image has been resized. Click this bar to view the full image. The original image is sized 1248x832.

NEW PRICE !!!  The price would be now 700 EURO + shipping OR you give
some reasonable offer!!!  Just you people must know that in those day
it was also HARD to find all extra cards and motherboards that will
work together 100% - On this computer you can also play all the OCS/ECS
games from the floppy i made a switch in the back to chose 0.5 or 1 chip
memory, also in this board was the FAT agnus (?) with 2mb chip mem, so
you know it will also work together with the other cards! Installed memory
is 32mb but you can install 128, (the monitor is not for sale, nostalgy!)
I will also include AmigaOS3.5 original and 100 disks with games.
Shapeshifter also works and i also will ship photoshop together with it!
I also include a videobackup system (hardware cable+box) with software!!!
and some stuff left out before but now i found it - here it is!
Logitech mouse (white as snow) in very very good shape
and a interface/adapter from ELBOX for using a PC mouse!


This image has been resized. Click this bar to view the full image. The original image is sized 1248x832.

This image has been resized. Click this bar to view the full image. The original image is sized 1248x832.

P.S. I also connected my LCD just to show that it also works!


P.S.
No trading b/c i m in need of cash! Payment via PayPal only!!!

Thanks

[gazgod]

Lots of pictures but none of the inside

I seriously doubt a 2k could fit in that case.

Gaz

[m4rk1z]

:roflmao:
yeah it fit when you do it right!

I will make some pictures today nop
i can also make some video if i get a real offer !!!

Thanks

[Amigaz]

If the case can take a full AT board it can fit

[gazgod]

The offical AT motherboard size is 12" x 13.8" (roughly 30cm x 35cm) and the 2000 board is 33x42cm. Having played with putting 2k's in daft cases I must say the board is a beast.

Also from the photos the front keyboard, mice and joystick ports are not there, and there is very little clearance under the cdrom, considering if a 2k board is in there it will fill the case.

If I had put a 2k in that case I'd be bragging about my engineering abilities and showing lots of photos of the interior.

Gaz

[save2600]

Yeah, about $960-$1k is what I was thinking my A2500 with similar specs should go for. Hopefully it does!

[m4rk1z]

Pictures are uploading right now, i also made pictures for the mouse and keyboard adapter for you!

New Post in 10 minutes!
cya

The offical AT motherboard size is 12" x 13.8" (roughly 30cm x 35cm) and the 2000 board is 33x42cm. Having played with putting 2k's in daft cases I must say the board is a beast.

Also from the photos the front keyboard, mice and joystick ports are not there, and there is very little clearance under the cdrom, considering if a 2k board is in there it will fill the case.

If I had put a 2k in that case I'd be bragging about my engineering abilities and showing lots of photos of the interior.

Gaz

[m4rk1z]

Imageshack speed sux!

OK here we go:

opened the box:



it is a messy place right but the scsi cabel must go that way
i had too much broken cabels as they go bad b/c they are soo
sensitive...

fitment of the mb on right side (you see the teac cdwriter):



fitment on the left side:



that's the cpu i glued a goldish color heatsink w/fan on it:
(i disconnected the floppy cabel to take that picture)



this is the rear of the blizzard you can see the mems attached:



and here you see the hdds and the oktagon and piccaso2 cards:





the back with switches for 3.1 or 1.3wb, 512 or 1chip mem:



i hope you like what i did, it is quite a mess, but there was no
other way to install all the stuff into the original a2000 case
b/c i wanted to fit the scsi reader and writer into it so i can
use it for making cd and also the rack for quick IDE hdd installs
and file transfers!

cya
Papdi

[Hell Labs]

Does the turbo button work :lol:

The led counter showing the clock speed is a nice touch too. I wish you could buy cases like that now.

[m4rk1z]

Does the turbo button work :lol:

The led counter showing the clock speed is a nice touch too. I wish you could buy cases like that now.

:laughing:

Yeah the button actually works but only the yellow led light up!
The third RED led is for hdd activity and also works great!
The clock speed is also possible (real) with o/c - no problem at all...

the only one thing a never did is the AMIGA sticker, a made some but
was to lazy to cut it and stick it to the case...   other projects had
greater priority, those coin up took too much time hehehehe

[Karlos]

Does the turbo button work :lol:

The led counter showing the clock speed is a nice touch too. I wish you could buy cases like that now.

Just get an LCD display and use it to show whatever you want.

[m4rk1z]

No offers???

I still got it...   someone buy it ...
:laughing:

[save2600]

Hate to say it bud, but if I can't sell my Blizzard 2060 for half the price you're asking, then we're both in a world of hurt. May as well keep the stuff, because you know... sooner than later - we'll regret selling it!  lol

[Beast96GT]

Hate to say it bud, but if I can't sell my Blizzard 2060 for half the price you're asking, then we're both in a world of hurt. May as well keep the stuff, because you know... sooner than later - we'll regret selling it!  lol

You're selling your stuff off?  Man, I was hoping to have a decent Chicago Amiga GTG at some point...

[TheMagicM]

is that hard drive just sitting on the mobo as pictured?  if so, you're not worried about shorting out the A2k?


@gaz:  :rolleyes: