Duke Nukem: No sound in WarpOS and MorhOS ports

[AmigaMance]

Hi.
 I have played this game for the first time on my Amiga 1200 today.
The 68k ports works without problems, but it runs slow as my 68k CPU is a 68040.
The WarpOS port runs fast but there is no sound.  Both tested under AOS 3.9.
MOS port under MOS 1.4.5 stucks at the "sound init" message.
 I have tried different AHI paula modes using the AmigaSetup tool, but none of them resolves the problem. So, currently, i'm stuck with a slow but fully working 68k port and a fast WOS port with no sound.
 Has anyone encounter this problem or knows what i could do about it.
 The sound settings from the config.cfg file are:

[Sound Setup]
FXDevice = 0
MusicDevice = 13
FXVolume = 240
MusicVolume = 128
NumVoices = 4
NumChannels = 2
NumBits = 16
MixRate = 22050
MidiPort = 0x0
BlasterAddress = 0x0
BlasterType = 3
BlasterInterrupt = 5
BlasterDma8 = 1
BlasterDma16 = 5
BlasterEmu = 0x0
ReverseStereo = 0
SoundToggle = 1
VoiceToggle = 1
AmbienceToggle = 1
MusicToggle = 1

[huronking]

Sound travels slower than light, so it just hasn't gotten here from 1996 yet.

Sorry...

[ddniUK]

sound is not implemented in Amiga port...

[CLS2086]

This sound setup file look like the pc's one.
Try NumBits = 8  because Paula can't handle 16 bits...

[Piru]

sound is not implemented in Amiga port...

I'm pretty sure I remember having audio with Duke.

[Piru]

Try NumBits = 8  because Paula can't handle 16 bits...

AHI can play 16bit sample data with paula.audio (depending on the mode either 8 or 2 bits are discarded).

[AmigaMance]

Right. Changing sound's resolution to 8 bits didn't fix it.
 So, has anyone managed to play the WarpOS port with sound or is it a known problem?

[CLS2086]

Which AHI release do you have ? and what are you AHI settings ?

[Matt_H]

Right. Changing sound's resolution to 8 bits didn't fix it.
 So, has anyone managed to play the WarpOS port with sound or is it a known problem?

Unless there's another WarpOS version kicking around, it looks like there's no sound support. See here.

[AmigaMance]

@CLS2086
 Ahi.device v4.180. It's the right version for Amigas without a sound card.
 As for the settings, i have tried many paula modes with various sampling rates from the Setup tool.


@Matt_H
 That's the WOS version i'm using. That note about sound support evaded my attention..  I've just read the documentation which is the same for 68k and WOS versions.
 Case closed then. Thank you.