Problem with Zip 2 Simm adapter

[desantii]

I recently received a zip 2 Simm adapter from DJ Base. I am having some problems, I installed the board (even removed my MB to ensure its properly put in) but all I get is a Red Guru "Software Failure" error.

I have tried with 8mb FPM and EDO simms, 4mb simms and same result.

Any advice from users I would appreciate


FYI: rev B red board for A3000 Desktop

[mousehouse]

Have some issues with it myself as well... did you try running it without any SIMMs installed?

I found that I don't have any compatible SIMMs lying around. The LED on the adapter would just stay red all the time.

[desantii]

Without simms it works fine, althought the light is always red as well. The documenttaion does not say what the light or the jumper are for

[mousehouse]

The jumper is supposedly self-explainatory, and should set if you have one or two SIMMs I believe. DJBase should be able to help here ;-)

[desantii]

Tried 1 and 2 simms, same issue red "software failure"

[desantii]

actually got it to boot! Changed jumper 851 from 16 to 25