Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Floppy drive startup  (Read 1038 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline punkyclownTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 262
    • Show only replies by punkyclown
Floppy drive startup
« on: November 06, 2009, 11:29:24 PM »
Can someone please tell me why it takes about 25 seconds after I turn on my A1200 for my floppy drive to start moving?  It is really annoying.  Thanks
Logged
 

Offline Tajmaster

  • Full Member
  • ***
  • Join Date: Jun 2009
  • Posts: 156
    • Show only replies by Tajmaster
Re: Floppy drive startup
« Reply #1 on: November 07, 2009, 12:51:18 AM »
If you mean the delay between the initial power up and the "insert disk" animation, its because your A1200 is checking/waiting for a hard disk on the built in IDE port. If you have a hard disk installed it boots up straight away, much like the older A500/A600 models do.
 
Hope this helps :)
Logged
==================
Amiga 4000/040 25Mhz - 18MB Ram-HDD-CDRW- Picasso 2 2MB GFX OS3.9
Amiga 2000/030 25Mhz - 10MB Ram - GVP HC+8 with HDD and CDROM OS3.1 and a DKB MEGAChip
Amiga 1200/030 50Mhz - 18MB Ram - CF>IDE OS3.1 Squirrel SCSI
A500+ 000/7Mhz - 4MB Ram GVP HD+ SCSI w/40MB HDD (WOW!!)
Plus a "few" more ;) hehe
==================
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show only replies by rkauer
Re: Floppy drive startup
« Reply #2 on: November 07, 2009, 12:58:06 AM »
Kickstart normal behaviour.
Logged
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 
Pages: [1]   Go Up
« previous next »