Welcome, Guest. Please login or register.

Author Topic: The DraCo/Dracovision, the first "true" Amiga clone  (Read 10895 times)

Description:

0 Members and 2 Guests are viewing this topic.

Offline orb85750

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show only replies by orb85750
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #44 from previous page: November 12, 2010, 10:21:38 PM »
Quote from: Iggy;591279
That would be the site! Thanks Gulliver.


Very expensive.  Go to eBay for cheaper (and complete) Casablanca systems if you want one.
 

Offline nicholas

Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #45 on: November 12, 2010, 10:26:52 PM »
Quote from: orb85750;591286
Very expensive.  Go to eBay for cheaper (and complete) Casablanca systems if you want one.


I saw a Draco go for about £300 on ebay around 5 or 6 years ago.  I was tempted to buy it at the time, wish I had done now.
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline jaesonk

  • Newbie
  • *
  • Join Date: Sep 2009
  • Posts: 33
    • Show only replies by jaesonk
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #46 on: November 12, 2010, 11:13:06 PM »
Cassie Classic is probably cheaper to acquire than a DraCo.  They seemed to me to be more of an easier to use DraCo-lite targeted at consumers rather than a higher end market.  After stepping onto the scene with the expensive DraCo, it'd make sense to try again with a lite version that was less expensive.

What's the Cassie Classic look like on the inside?  Anyone have pictures?  Are any chips compatible with the DraCo?  Could be a source of parts.

Anyone have documentation for the DraCo expansion ports/sockets, like the socket for the DEC-ALPHA accelerator?
 

Offline GulliverTopic starter

Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #47 on: November 12, 2010, 11:36:55 PM »
 

Offline orb85750

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show only replies by orb85750
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #48 on: November 13, 2010, 12:42:10 AM »
Quote from: nicholas;591288
I saw a Draco go for about £300 on ebay around 5 or 6 years ago.  I was tempted to buy it at the time, wish I had done now.


Yes I would have grabbed it.  However, the Casablanca is cheaper and far more common.  If you're patient, you should be able to pick one up for about $150-200 complete with 060 and 18 GB hard drive.
 

Offline nicholas

Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #49 on: November 13, 2010, 12:49:24 AM »
Quote from: orb85750;591337
Yes I would have grabbed it.  However, the Casablanca is cheaper and far more common.  If you're patient, you should be able to pick one up for about $150-200 complete with 060 and 18 GB hard drive.


Wow! Good price indeed!

Never see any one Ebay UK though.

Just checked ebay US and nothing on there atm.  I'd really like one to play around with, would be an excellent toy project to try and get OS3.9 or AROS 68k even running on it. :)
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline slayer

  • Full Member
  • ***
  • Join Date: May 2009
  • Posts: 188
    • Show only replies by slayer
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #50 on: November 13, 2010, 04:04:51 AM »
I have 2 draco cubes but never turned either on yet, infact one is still packed (hmmm, 5 years and counting probably LOL). They are certainly well built and look very cool!

I've recently been intouch with the person who sells the modified AmigaOS3.9 on CDRom still... but decided at the end not to get it... he wants 65 euro which I think isn't very fair since you can get the Cybergraphics and AmigaOS3.9 for under 10 euro each... I do own both etc

If anyone can help me in obtaining this I'd be very pleased, PM me :)

He didn't reply to that last email...

Anyway, interesting thread :-)
~Yes I am a Kiwi, No, I did not appear as an extra in \'Lord of the Rings\'~
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
 

Offline orb85750

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show only replies by orb85750
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #51 on: November 13, 2010, 04:43:36 AM »
Quote from: nicholas;591340
Wow! Good price indeed!

Never see any one Ebay UK though.

Just checked ebay US and nothing on there atm.  I'd really like one to play around with, would be an excellent toy project to try and get OS3.9 or AROS 68k even running on it. :)


Here's one on eBay with "rendering acceleration" (i.e. 68060) and a 30-day warranty, but cosmetic condition doesn't look so great.

http://cgi.ebay.com/Germany-Casablanca-MacroSystem-Video-Editing-230-115V-/280588142599?pt=LH_DefaultDomain_2&hash=item41545b4807
 

Offline jaesonk

  • Newbie
  • *
  • Join Date: Sep 2009
  • Posts: 33
    • Show only replies by jaesonk
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #52 on: November 14, 2010, 06:08:13 AM »
You can't install the regular Amiga OS3.9 on a DraCo, or OS3.5.  DraCo requires special patching for OS3.9 or OS3.5 installation.
 

Offline nicholas

Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #53 on: November 14, 2010, 01:06:26 PM »
Quote from: orb85750;591381
Here's one on eBay with "rendering acceleration" (i.e. 68060) and a 30-day warranty, but cosmetic condition doesn't look so great.

http://cgi.ebay.com/Germany-Casablanca-MacroSystem-Video-Editing-230-115V-/280588142599?pt=LH_DefaultDomain_2&hash=item41545b4807


Thanks! Hmmm... Feed my kids or make a bid? Lol
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline nicholas

Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #54 on: November 14, 2010, 01:09:07 PM »
Quote from: jaesonk;591615
You can't install the regular Amiga OS3.9 on a DraCo, or OS3.5.  DraCo requires special patching for OS3.9 or OS3.5 installation.


I'm thinking more along the lines of AROS 68k. :)
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline salax54

  • Jr. Member
  • **
  • Join Date: Jun 2009
  • Posts: 70
    • Show only replies by salax54
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #55 on: November 14, 2010, 08:37:36 PM »
Well, folks, i'm actually glad you haven't seen what i have seen a couple of weeks ago on the Austrian ebay! I'm saying this, because you would 've been as depressed as i have! There came around the "chance of a lifetime", really! This guy sells a couple of Draco cubes, and a tower, plus all the extra paraphernalia you could imagine of! And i says OMFG! I'm gonna hit this one! Allas, shipping was beyond just forbidding...
Even though he stated shipping within EU would be around 220,00€, when i asked for more details, he said: i don't ship to your country, you gotta find your own courrier! (mind you, the auction claimed Shipping:Worldwide)
So, i started searching for the right courier. To better understand the size of the whole whatchamacall it, it measured 100x100x160cm, and weighted 150kgs!!! Most wouldn't deal with a set like that, and only one of the well-known couriers would do it, for the special price of 2700€.
That ended the dream for me as you can understand...
Although the auction ended rather cheap (ultra-cheap i would say), and i was prepared to spend up to maybe 1000€, the whole deal would simply take off!
And now, hopefully you'll still have some time to browse through this deal until it's erased from the "bay" by clicking here: http://cgi.ebay.at/Macro-System-Draco-Cube-Amiga-Videoschnittsystem-V-Lab-/220685592107
Warning: not for the faint-hearted! I'm sure Draco lovers will understand my feelings after this... :(
 

Offline nicholas

Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #56 on: November 14, 2010, 09:06:36 PM »
Quote from: salax54;591725
Well, folks, i'm actually glad you haven't seen what i have seen a couple of weeks ago on the Austrian ebay! I'm saying this, because you would 've been as depressed as i have! There came around the "chance of a lifetime", really! This guy sells a couple of Draco cubes, and a tower, plus all the extra paraphernalia you could imagine of! And i says OMFG! I'm gonna hit this one! Allas, shipping was beyond just forbidding...
Even though he stated shipping within EU would be around 220,00€, when i asked for more details, he said: i don't ship to your country, you gotta find your own courrier! (mind you, the auction claimed Shipping:Worldwide)
So, i started searching for the right courier. To better understand the size of the whole whatchamacall it, it measured 100x100x160cm, and weighted 150kgs!!! Most wouldn't deal with a set like that, and only one of the well-known couriers would do it, for the special price of 2700€.
That ended the dream for me as you can understand...
Although the auction ended rather cheap (ultra-cheap i would say), and i was prepared to spend up to maybe 1000€, the whole deal would simply take off!
And now, hopefully you'll still have some time to browse through this deal until it's erased from the "bay" by clicking here: http://cgi.ebay.at/Macro-System-Draco-Cube-Amiga-Videoschnittsystem-V-Lab-/220685592107
Warning: not for the faint-hearted! I'm sure Draco lovers will understand my feelings after this... :(


I am so depressed after looking at that auction! :'(
“Een rezhim-i eshghalgar-i Quds bayad az sahneh-i ruzgar mahv shaved.” - Imam Ayatollah Sayyed  Ruhollah Khomeini
 

Offline tone007

Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #57 on: November 14, 2010, 09:19:49 PM »
Quote from: salax54;591725
Warning: not for the faint-hearted! I'm sure Draco lovers will understand my feelings after this... :(


WAOooAOOAOAREROHHH
3 Commodore file cabinets, 2 Commodore USB turntables, 1 AmigaWorld beer mug
Alienware M14x i7 laptop running AmigaForever
 

Offline magnetic

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2531
    • Show only replies by magnetic
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #58 on: November 16, 2010, 12:39:06 AM »
Hey guys

Just so you know I'm selling my Uber Rare DraCo VISION Cube with DV Module and hundreds of gbs of space! (hours and hours of video) Has a nice 060 board and Cybergrafx! Superb condition complete with keyboard and mouse and has tons of software installed Like Dir Opus, Image Fx, Monument Designer and more!  

Selling it because I just acquired an a4000T!  Let me know if you are interested.

Thanks
bPlan Pegasos2 G4@1ghz
Quad Boot:Reg. MorphOS | OS4.1 U4 |Ubuntu GNU-Linux | MacOS X

Amiga 2000 Rom Switcher w/ 3.1 + 1.3 | HardFrame SCSI | CBM Ram board| A Squared LIVE! 2000 | Vlab Motion | Firecracker 24 gfx

Commodore CDTV: 68010 | ECS | 9mb Ram | SCSI -TV | 3.9 Rom | Developer EPROMs
 

Offline actung_bab

  • Hero Member
  • *****
  • Join Date: Oct 2006
  • Posts: 650
    • Show only replies by actung_bab
Re: The DraCo/Dracovision, the first "true" Amiga clone
« Reply #59 on: November 16, 2010, 01:35:55 AM »
you know you dont have to have things sent by air  brought set speakers for usa ebay
was from texas (they do things big there ) l live in new zealand so by austrila
air freight was going cost fortune so he sent surface by sea was okay didnt take too long
thye big speakers too mind yu not 150 kg by any means maybe 40kg
Acthung baby
http://telnet://midnight-blue.dyndns.org
Cnet 4.60 PRO bbs software
Amiga 1200 020 14 mhz mbz 1200 z pcmcia network card 4 meg ram 2 Gb scandisk cf
Amiga 2000 020
Amiga 4000 030 25 mhz broken
Amiga x 4 1200
x 6 Sony Ps 3 Orginal 60 gb 4  port usb 160 gb hd (os 4.1 ready :-)
what can i say i like thse machines
x 3 XBOX 360 1x xbox 360 slim
url=http://avatars.jurko.net][/