Welcome, Guest. Please login or register.

Author Topic: A500 powerled flashes  (Read 3031 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Markus_BielerTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show only replies by Markus_Bieler
    • http://www.traumstation.ch
A500 powerled flashes
« on: October 07, 2003, 09:07:46 PM »
My old A500 has a big problem. The powerled flahses 10x short and 1x long then makes a reset and it starts flashing again. Any advise what it could be?

There is no screen, nor the floppy clicks.
 

Offline Linchpin

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1483
    • Show only replies by Linchpin
    • http://www.systemmedic.co.uk
Re: A500 powerled flashes
« Reply #1 on: October 07, 2003, 09:30:04 PM »
Have you tried reseating the kickstart ROM?
WinUAE Only... OS3.9 with 512mb ZIII ram ;)
 

Offline SilvrDrgn

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 1215
  • Country: 00
    • Show only replies by SilvrDrgn
    • http://mikerye.ddns.net
Re: A500 powerled flashes
« Reply #2 on: October 07, 2003, 09:31:04 PM »
Reseat all of the chips for that matter.
Michael
 

Offline Linchpin

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1483
    • Show only replies by Linchpin
    • http://www.systemmedic.co.uk
Re: A500 powerled flashes
« Reply #3 on: October 07, 2003, 09:34:02 PM »
I had a simular problem with an old kick1.3 rom, turns out it was fried due to being put in the wrong way... oops

be careful!

Reseating will proberbly help.
WinUAE Only... OS3.9 with 512mb ZIII ram ;)
 

Offline Markus_BielerTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show only replies by Markus_Bieler
    • http://www.traumstation.ch
Re: A500 powerled flashes
« Reply #4 on: October 07, 2003, 09:43:01 PM »
I'll try a new kickrom.

tnx
 

Offline lempkee

  • Hero Member
  • *****
  • Join Date: Apr 2002
  • Posts: 2860
    • Show only replies by lempkee
    • http://www.amigaguru.com
Re: A500 powerled flashes
« Reply #5 on: October 07, 2003, 09:48:28 PM »
i guess u get a red screen aswell ?

reseat the rom's..

cheers
Whats up with all the hate!
 

Offline Markus_BielerTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show only replies by Markus_Bieler
    • http://www.traumstation.ch
Re: A500 powerled flashes
« Reply #6 on: October 07, 2003, 09:53:51 PM »
no red screen.

the a500 acts like dead. just the powerleds keeps flashing.

Markus
 

Offline Markus_BielerTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show only replies by Markus_Bieler
    • http://www.traumstation.ch
Re: A500 powerled flashes
« Reply #7 on: October 07, 2003, 10:01:23 PM »
I replaced the rom (1.3) with an 2.05 rom and guess what. I get a green screen. Chipmem is dead or Agnus fried.

 

Offline Linchpin

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1483
    • Show only replies by Linchpin
    • http://www.systemmedic.co.uk
Re: A500 powerled flashes
« Reply #8 on: October 07, 2003, 10:06:24 PM »
Do you have a ramboard in it?
WinUAE Only... OS3.9 with 512mb ZIII ram ;)
 

Offline Linchpin

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1483
    • Show only replies by Linchpin
    • http://www.systemmedic.co.uk
Re: A500 powerled flashes
« Reply #9 on: October 07, 2003, 10:09:09 PM »
Did you re-sit all or just change the rom?
WinUAE Only... OS3.9 with 512mb ZIII ram ;)
 

Offline amigamad

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 2159
    • Show only replies by amigamad
Re: A500 powerled flashes
« Reply #10 on: October 08, 2003, 12:10:51 AM »
I broke an a500 up that did this ages ago but all chips were tested and the only one that did not work was the rom chip so i tried a good 2.04 rom that i had not had that long and it blew the chip that was £24.99 wasted .

 :-?
I once had an amigaone xe but sold it .

http://www.tamiyaclub.com
 

Offline Markus_BielerTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show only replies by Markus_Bieler
    • http://www.traumstation.ch
Re: A500 powerled flashes
« Reply #11 on: October 08, 2003, 12:17:18 AM »
I guess this a500 is broken. Sometimes after several resets with green screen, I get a yellowscreen. Guru before the guru-handler was activated.

I changed all chipos against other ones from old (rev 5.0 board) but no luck.

Markus
 

Offline redrumloa

  • Original Omega User
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 10126
    • Show only replies by redrumloa
Re: A500 powerled flashes
« Reply #12 on: October 08, 2003, 01:03:14 AM »
Ouch touch luck:-( Any visible signs of damage to the mb?
Someone has to state the obvious and that someone is me!
 

Offline Linchpin

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1483
    • Show only replies by Linchpin
    • http://www.systemmedic.co.uk
Re: A500 powerled flashes
« Reply #13 on: October 08, 2003, 09:21:19 AM »
ANd i just so happen to know a guy that can sort you out with a NEW ONE :-)
WinUAE Only... OS3.9 with 512mb ZIII ram ;)
 

Offline Markus_BielerTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show only replies by Markus_Bieler
    • http://www.traumstation.ch
Re: A500 powerled flashes
« Reply #14 on: October 08, 2003, 09:09:36 PM »
I got an advice from the former service technicien of Commodore Switzerland. It cold be the 1488 or 1489 IC being defective. This chips have something to do with the serial port. As they cost nearly nothing I'll change them.