Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Zorro 3 problem  (Read 1166 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline MikePigTopic starter

  • Newbie
  • *
  • Join Date: Aug 2003
  • Posts: 7
    • Show only replies by MikePig
Zorro 3 problem
« on: September 26, 2003, 10:55:55 PM »
Hi

What can cause  Zorro3 cards not working in an A4000D although Zorro2 cards are working ?
buster 11 socketed

TIA

Michel
Logged
 

Offline Markus_Bieler

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show only replies by Markus_Bieler
    • http://www.traumstation.ch
Re: Zorro 3 problem
« Reply #1 on: September 27, 2003, 12:41:06 AM »
1. Which card?

2. Change the slot

3 Bad card. I had once a DKB3128 with red startup-screen
Logged
 

Offline duesi

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 275
    • Show only replies by duesi
Re: Zorro 3 problem
« Reply #2 on: September 27, 2003, 07:14:38 AM »
I once had the same problem.
You have to put the ZorroIII cards before the ZorroII cards...that means the first Slot is that one nearest the RAM-Banks..

If only one ZorroIII card is installed and not recognized..then your Buster is probably faulty

Also make sure your cards are working :-)
Logged
A4000D CS060/MKII with SCSI, CV64/4MB, 128MB Fast, ACARD AEC-7720U SCSI-IDE,80GB Samsung HDD, Yamaha CDRW, XSurf2, OS3.9BB2
A500,1MB Chip Kick1.3/3.1,GVP A500+ 540MB HDD and 8MB Fast,GVP DSS 8Bit Sampler
 
Pages: [1]   Go Up
« previous next »