What is best screen mode for A1200 ?

[dougal]

Hi ,

I have an A1200 connected to a commodore 1084S .

It has 16mb fast ram (im upgrading to 64mb next week)
Also has a Blizzard 1230 accelerator
I am running OS3.9

Its connected to the monitor using the standard Amiga RGB cable .

My current screen mode is :640x512 Interlaced

The resolution is great and the Amiga is still fast , but the flicker from the interlace is annoying .

Is there any custom screen mode i can set it to where it has NO interlace , still looks nice and actually fits on the whole screen ?

[meega]

PAL non-laced with max overscan - 724x283 - should be possible... I used to use that, it's not too bad. You might also try NTSC non-laced, again with max overscan, 724 wide and 240-odd high but at 60Hz for a slightly less flicky screen. The 1084S can't do much better (or much else).

[dougal]

Tried it now .

It is still interlaced and only fills in the top screen .

meega wrote:
PAL non-laced with max overscan - 724x283 - should be possible... I used to use that, it's not too bad. You might also try NTSC non-laced, again with max overscan, 724 wide and 240-odd high but at 60Hz for a slightly less flicky screen. The 1084S can't do much better (or much else).

[meega]

dougal wrote:
Tried it now .

It is still interlaced and only fills in the top screen .

Then either you've done something wrong or your monitor is broken. :-)

[dougal]

I think something is up with the OS3.9

Monitor works fine for games and works fine with my A4000 too (Using the same cable as of my A1200).

On screen prefs i doesnt mention PAL anywhere , there is just a list of about 6 or 8 different screen modes and thats it .

meega wrote:

dougal wrote:
Tried it now .

It is still interlaced and only fills in the top screen .

Then either you've done something wrong or your monitor is broken. :-)

[Matt_H]

Copy the PAL, NTSC, and Euro36 monitors from SYS:Storage/Monitors to SYS:Devs/Monitors.

And make sure your startup-sequence has the line C:LoadMonDrvs

Euro36 might be a little less flickery.

[dougal]

Thanks Matt ,

I tried them , but didn't like any of them .

Are there any hacks or custom downloadable ones that would do a nice job ?

I really need to buy the indivision , which i will when i have the money ..

Oh another question , is it true that with the indivision and connected to an LCD VGA monitor , games are jerky ?

Matt_H wrote:
Copy the PAL, NTSC, and Euro36 monitors from SYS:Storage/Monitors to SYS:Devs/Monitors.

And make sure your startup-sequence has the line C:LoadMonDrvs

Euro36 might be a little less flickery.

[NovaCoder]

dougal wrote:
Thanks Matt ,

Oh another question , is it true that with the indivision and connected to an LCD VGA monitor , games are jerky ?

Yeah the Indivision is the answer

As long as the monitor you're using will sync down to 50hz then you can run games without the jerk.

[lionstorm]

get MagicTV from Aminet and you will get a more stable picture in interlaced 640x512.

the drawback is that the mouse pointer is black and the number of colors of the WB is limited to 16.

[Rebel-CD32]

16 colours is all you need for a decent looking Workbench. Use MagicTV until you get an Indivision AGA, it does help a bit.

[dougal]

I tried it but for some reason it crashes my Amiga :-(

I must be doing something wrong because my Amiga is fine .

[dougal]

WOW

It works wonders :-)

Only things that dont look so nice at 16 colour is the black mouse pointer and the Amidock .

But the rest looks great

And no flicker :-)

[motrucker]

There is a program called MonED that allows adjusting your monitor driver - but care must be taken! you can hurt your monitor if you push things too far.
Having said that - I have never killed a monitor, and it has an easy to use graphic slider type interface.
I use MonEd to tweak Super 72 on my A1200 (NTSC) for an 800/600 display with no flicker.

[stefcep2]

motrucker wrote:
There is a program called MonED that allows adjusting your monitor driver - but care must be taken! you can hurt your monitor if you push things too far.
Having said that - I have never killed a monitor, and it has an easy to use graphic slider type interface.
I use MonEd to tweak Super 72 on my A1200 (NTSC) for an 800/600 display with no flicker.

Is that a 1084 monitor.  Can you post your moned config file?

[brianb]

I hate interlaced video...  I used 640x480 on my C= 1960 monitor, and now 1024x768 with my Indivision AGA (Awesome!).  I guess the 1084 will limit your options.  It's a great monitor, just not for hires workbench.