Welcome, Guest. Please login or register.

Author Topic: Would this work with my A2000?  (Read 1513 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline iconoclaSTTopic starter

  • Jr. Member
  • **
  • Join Date: Jan 2009
  • Posts: 63
    • Show only replies by iconoclaST
Would this work with my A2000?
« on: February 13, 2009, 05:32:29 AM »
Well, as my A2091 card as a SCSI port on the back, I found this to be the cheapest SCSI CDROM on ebay that has been tested:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330304731777&ssPageName=ADME:X:RTQ:US:1123

Think it would work with my A2000 under KS/WB 1.3?
 

Offline DoogUK

  • Sr. Member
  • ****
  • Join Date: Dec 2007
  • Posts: 344
    • Show only replies by DoogUK
Re: Would this work with my A2000?
« Reply #1 on: February 13, 2009, 10:43:09 PM »
Should be ok with idefix97 as that supports cd changers.
a1200T/040@40/64mb/10 gig/CWB
a600/3.5mb/3.25gb
a1200/blizz 040@40/128mb/4gb compact flash/CWB A4000/40
 

Offline Matt_H

Re: Would this work with my A2000?
« Reply #2 on: February 13, 2009, 10:46:20 PM »
You'll need a 1.3-compatible CD filesystem, for sure. There might be issues with the multiple discs, depending on how the device presents itself to the system.
 

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show only replies by Zac67
Re: Would this work with my A2000?
« Reply #3 on: February 13, 2009, 10:55:12 PM »
These Nakamichis used to be able to run as a single drive plus a changer device or as just a stack of drives where the changer swaps in the discs as required automatically. The latter mode would - probably - work with any CDROM driver and a mountlist entry for each slot.
 

Offline save2600

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 3261
  • Country: us
    • Show only replies by save2600
Re: Would this work with my A2000?
« Reply #4 on: February 13, 2009, 11:23:15 PM »
asimCDFS knows how to deal properly with Nak changers...


 

Offline iconoclaSTTopic starter

  • Jr. Member
  • **
  • Join Date: Jan 2009
  • Posts: 63
    • Show only replies by iconoclaST
Re: Would this work with my A2000?
« Reply #5 on: February 14, 2009, 07:06:40 AM »
Wait, can the Amiga not read ISO9660 filesystems?

And where would I find the proper drivers?
I take it that BabelCDFS is simply just a way to read ISO9660 filesystems...