Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: 1 [2]   Go Down

Author Topic: Minimig question - is it ready?  (Read 3811 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline bloodline

  • Master Sock Abuser
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 12114
    • Show only replies by bloodline
    • http://www.troubled-mind.com
Re: Minimig question - is it ready?
« Reply #14 from previous page: February 10, 2009, 05:46:51 PM »
Quote

yaqube wrote:
The USB port on the ARM board isn't a host port. It's a device port and you can connect it only to a host (PC) or a hub.

Currently it's only used for initial firmware upload (any further flash updates can be made from an SD-Card) or to revive bricked boards.

With appropriate software support it could be used for virtuallization of serial and/or parallel port.


Which Controller are you using?
Logged
 

Offline yaqube

  • Full Member
  • ***
  • Join Date: Feb 2008
  • Posts: 197
    • Show only replies by yaqube
Re: Minimig question - is it ready?
« Reply #15 on: February 10, 2009, 05:50:52 PM »
Quote
bloodline wrote:
Which Controller are you using?


Atmel AT91SAM7S256.

Logged
 

Offline bloodline

  • Master Sock Abuser
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 12114
    • Show only replies by bloodline
    • http://www.troubled-mind.com
Re: Minimig question - is it ready?
« Reply #16 on: February 10, 2009, 06:05:31 PM »
Quote

yaqube wrote:
Quote
bloodline wrote:
Which Controller are you using?


Atmel AT91SAM7S256.



Hmm, that is a really nice chip!!! Really underused in MiniMIG :-D

How much of the Flash is in use, currently?
Logged
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show only replies by Darrin
Re: Minimig question - is it ready?
« Reply #17 on: February 10, 2009, 06:17:22 PM »
Quote

yaqube wrote:
The USB port on the ARM board isn't a host port. It's a device port and you can connect it only to a host (PC) or a hub.

Currently it's only used for initial firmware upload (any further flash updates can be made from an SD-Card) or to revive bricked boards.

With appropriate software support it could be used for virtuallization of serial and/or parallel port.


Well that's buggered that idea.  Mind you, using it as a parallel port might have some uses.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show only replies by Darrin
Re: Minimig question - is it ready?
« Reply #18 on: February 10, 2009, 06:20:02 PM »
Quote

Darrin wrote:

Well that's buggered that idea.  Mind you, using it as a parallel port might have some uses.


Mind you, the C-One has a couple of A1200 clock ports.  Perhaps a Subway could be connected to them if they were active withing the Minimig environment.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline yaqube

  • Full Member
  • ***
  • Join Date: Feb 2008
  • Posts: 197
    • Show only replies by yaqube
Re: Minimig question - is it ready?
« Reply #19 on: February 10, 2009, 06:21:48 PM »
Quote
bloodline wrote:
How much of the Flash is in use, currently?


Currently 31 KB of the Flash is used (the Flash is 256 KB in total) and over 16 KB of RAM.

Subfolder support has not been implemented yet.

Logged
 

Offline bloodline

  • Master Sock Abuser
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 12114
    • Show only replies by bloodline
    • http://www.troubled-mind.com
Re: Minimig question - is it ready?
« Reply #20 on: February 10, 2009, 07:36:38 PM »
Quote

yaqube wrote:
Quote
bloodline wrote:
How much of the Flash is in use, currently?


Currently 31 KB of the Flash is used (the Flash is 256 KB in total) and over 16 KB of RAM.

Subfolder support has not been implemented yet.



Yeah, that is a lot of Flash space! :-)
Logged
 
Pages: 1 [2]   Go Up
« previous next »