MiniMig with AGA

[Darrin]

Actually I'm calling AddMemList() function with MEMF_CHIP attribute.

Is there room inside the Minimig v1.x FPGA for your AGA core?  Or the C-One?

[yaqube]

Is there room inside the Minimig v1.x FPGA for your AGA core?  Or the C-One?

In Minimig V1.x FPGA definitely not but it should fit inside C-One Minimig extender FPGA. But be aware that the C-One doesn't support 24-bit video output, has no DDR memory neither dedicated system controller.

[Karlos]

I have to say this is quite nice stuff. Now it just needs the 020 core.

+1

It's fair to say that an 020 compatible core would be advantageous as there has never been a vanilla 68000 AGA combination before, so compatibility may be adversely affected for a lot of AGA titles.

Still, it's bloody impressive.

[Darrin]

In Minimig V1.x FPGA definitely not but it should fit inside C-One Minimig extender FPGA. But be aware that the C-One doesn't support 24-bit video output, has no DDR memory neither dedicated system controller.

Ah, so not much point then.

I'll just have to put my name down for the FPGA Arcade.  

[NovaCoder]

To create a 'nice' replacement AGA machine, all you'd need is to hook the FPGA Arcade to an 030 daughter board

An 060 100mhz would be a great option BUT would cost big $$$$

[yaqube]

An 060 100mhz would be a great option BUT would cost big $$$$

Don't tempt me :hammer:

[B00tDisk]

Don't tempt me :hammer:

Tempt you?  Psh.  You don't have the guts to try it.  C'mon!  I dare you!  I double dog dare you!

[wizard66]

Nice stuff boy's realy dig this..

@Yacube nice job again you never stop to suprise me with your corefiles...

@MikeJ hurry up with the boards i'm inline from the beginning to get one of your FPGAARCADE board LOL..

Where can I store my old amiga's now ;-))

[alexh]

An 060 100mhz would be a great option BUT would cost big $$$$

Depends how much the daughter cards are. I've got six 100MHz 060 chips here I bought off eBay in a tray for under $40 a few years ago.

[NovaCoder]

Depends how much the daughter cards are. I've got six 100MHz 060 chips here I bought off eBay in a tray for under $40 a few years ago.

Yep I guess if they sold them unpopulated it could work but I was thinking about the new price of 060's vs the new price of 030's.

[koaftder]

Depends how much the daughter cards are. I've got six 100MHz 060 chips here I bought off eBay in a tray for under $40 a few years ago.

You should take some pictures of your workshop and post 'em on here. No doubt many of us will be jealous.

[Darrin]

Depends how much the daughter cards are. I've got six 100MHz 060 chips here I bought off eBay in a tray for under $40 a few years ago.

Does the tray fit in the Amiga CPU slot or connect to the A1200 trapdoor expansion?

[countzero]

Yep I guess if they sold them unpopulated it could work but I was thinking about the new price of 060's vs the new price of 030's.

what do you mean by 'new' ? I doubt any of the 68k line is being produced anymore ... So it'll have to be second hand no matter what ... :hammer:

[countzero]

Does the tray fit in the Amiga CPU slot or connect to the A1200 trapdoor expansion?

:lol: you're kidding right :afro:

[NovaCoder]

what do you mean by 'new' ? I doubt any of the 68k line is being produced anymore ... So it'll have to be second hand no matter what ... :hammer:

You'd be suprised MC68030 68060

[Dr_Righteous]

Those prices are insane! I realize the demand is low, but those prices don't exactly invite development either.