BVision under OS4

[motorollin]

MozzerFan wrote:
If the screenmode you specified is not within the range of the frequencies you entered (and that your monitor can handle), then indeed the screenmodes won't show up.

I'll check the frequencies for my monitor and try setting them to what they should be and report back!

--
moto

[motorollin]

Framiga wrote:
there are plenty of 68K apps working under AOS4.

Old games apart, theres nothing i can recall, that stopeed working.

Well, most of my Amiga use these days is WHDLoad. So I'm not really sure what I'll use OS4 for. I'm open to suggestions :-)

--
moto

[A4000_Mad]

motorollin wrote:

A4000_Mad wrote:
I had to manually change the circled figures from 800x600 to 1024x768. You might want to try that too :-)

I did try that, but it left the actual resolution at 800x600 but gave me 1024x768 overscan.

I also had 1024x768 in a small window in the middle of the monitor screen, and wondered what the hell was going on :lol: I had to press the adjustment button on the front of my monitor. Then had to use the one that stretches the screen wider. But then my AmigaOS4 backdrop didn't look right, so went into WBPattern and changed 'Tile' to 'Scale well'.  

[Framiga]

A4000_Mad wrote:

MozzerFan wrote:
@amiga4000_mad
Found this info about the MV520.

After reading it I think you should enter the following:
VSYNCMIN=50
VSYNCMAX=100
HSYNCMIN=31500
HSYNCMAX=54000

Thank you very much :pint:

I've now got 1024x768 16bit

@ moto

I had to manually change the circled figures from 800x600 to 1024x768. You might want to try that too :-)

 

naaa! enable both the Default checkboxes and you will get the resolution centered and filling the whole screen!

[A4000_Mad]

D'oh! Thanks :-D

[motorollin]

Just added the correct frequencies in to the monitor tooltypes and I can now use higher resolutions. Cheers! :-D

--
moto