Welcome, Guest. Please login or register.

Author Topic: 9 Pin Analogue to RGB Phono (or SCART), do they exist?  (Read 2280 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
9 Pin Analogue to RGB Phono (or SCART), do they exist?
« on: June 04, 2008, 06:47:17 PM »
Just as title really. Recently aquired an Acorn A3000 (not Amiga related but a rival to the Amiga in the UK. I would like to know if there is such a cable as it would be good to hook it upto a TV rather then another seperate monitor using up valuable space in my room. (Space which I dont have).
 

Offline Daedalus

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 893
    • Show only replies by Daedalus
    • http://www.robthenerd.com
Re: 9 Pin Analogue to RGB Phono (or SCART), do they exist?
« Reply #1 on: June 04, 2008, 06:59:48 PM »
Lol, they even had an A4000 model ;-) They weren't really much competition for the big box Amigas or the A1200 though, but nice machines in their own right... Anyway, apparently, the A3000 output is *almost* compatible with SCART, but can't provide the sync signal needed without an external "active cable". I'm sure the electronics involved would be pretty simple if you were so inclined as to try make one, but good luck finding an original ;)

Source:

http://acorn.riscos.com/documents/appnotes/246-260/249.ps
Engineers do it with precision
--
http://www.robthenerd.com
 

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
Re: 9 Pin Analogue to RGB Phono (or SCART), do they exist?
« Reply #2 on: June 04, 2008, 07:16:34 PM »
I'm hopeless at soldering so I will have to look for one or get one made. Thanks for the info too.
 

Offline Speelgoedmannetje

  • Hero Member
  • *****
  • Join Date: Oct 2002
  • Posts: 9656
    • Show only replies by Speelgoedmannetje
Re: 9 Pin Analogue to RGB Phono (or SCART), do they exist?
« Reply #3 on: June 04, 2008, 07:19:49 PM »
Nice way to learn soldering, because it's very easy to solder such. Google for the pinouts of the 9 pin connector and SCART, and match the pins R, G, B, Ground, and Composite (Sync). These can be straightforwardly be attached.
And the canary said: \'chirp\'
 

Offline Daedalus

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 893
    • Show only replies by Daedalus
    • http://www.robthenerd.com
Re: 9 Pin Analogue to RGB Phono (or SCART), do they exist?
« Reply #4 on: June 04, 2008, 07:36:08 PM »
Well, yeah, that's how I cut my teeth soldering - making up leads I couldn't find/afford. Unfortunately that machine, while it has the RGB pinouts of CGA (I think - RGB DB9 anyway), the sync signal is too low for most TVs to accept and needs to be bumped up, making it slightly more complicated. A transistor, a resistor and a 12V line from somewhere would do it, but that's a bit more than your average My First Lead (tm). ;-)
Engineers do it with precision
--
http://www.robthenerd.com
 

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
Re: 9 Pin Analogue to RGB Phono (or SCART), do they exist?
« Reply #5 on: June 04, 2008, 09:56:01 PM »
I found this info here, would this work?

LINK
 

Offline Speelgoedmannetje

  • Hero Member
  • *****
  • Join Date: Oct 2002
  • Posts: 9656
    • Show only replies by Speelgoedmannetje
Re: 9 Pin Analogue to RGB Phono (or SCART), do they exist?
« Reply #6 on: June 04, 2008, 11:51:36 PM »
I can't find the video pinout as for yet, but if you're sure it's the same as the 1084S, then the only thing that would be a problem is what Daedalus said.
And the canary said: \'chirp\'
 

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
Re: 9 Pin Analogue to RGB Phono (or SCART), do they exist?
« Reply #7 on: June 05, 2008, 12:07:14 PM »
That's just it, i'm not sure... I just need some blueprints for one that will defernately work for that computer.