Amiga OS 3.9...

[Mauro73]

...and the Devs drawer:

why the items inside this drawer are not run on startup?

With AOS 3.1 if I put PC0 DosDriver into the Devs/Dosdrivers drawer it will be automatically run on startup.

Can someone make some light on this issue?

Thank you very much

Mauro

[pyrre]

that works perfectly on my setup.
Newer had eny issues with it....

[Mauro73]

pyrre wrote:
that works perfectly on my setup.
Newer had eny issues with it....

Not on mine: if I put a PC floppy into the diskdrive it doesn't appear on the desktop. I can see only the amiga floppy icon (the unreadable one of course).

But as soon as I doubleclick the PC0 icon then the PC floppy/crossdos magically appears.

But I think it's supposed to appear automatically, isn't it?

Mauro

P.S.

same thing for CD-ROM

[Matt_H]

Make sure this line (or similar) is in your startup-sequence:

Code: [Select]

C:Mount QUIET DEVS:DOSDrivers/~(#?.info)

[Mauro73]

Matt_H wrote:
Make sure this line (or similar) is in your startup-sequence:

Code: [Select]

C:Mount QUIET DEVS:DOSDrivers/~(#?.info)

Thank you, I'll check this immediately.

[Mauro73]

Ok there are no lines like the one posted by Matt_H.

But there is something like this:

C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

[Chain]

thats same, so its probably mounted.

are you using 720kb formatted DD diskette? it will not read standard 1.44mb HD disks

[motorollin]

Also, open a shell and type "info". It should tell you what devices are mounted.

--
moto

[Thomas]

Mauro73 wrote:
Ok there are no lines like the one posted by Matt_H.

But there is something like this:

C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

Temporarily remove the >NIL: to see if there are any error messages.

Bye,
Thomas

[Mauro73]

Thomas wrote:

Temporarily remove the >NIL: to see if there are any error messages.

Bye,
Thomas

Ok done: nothing happens. OS 3.9 goes straight to the end without error messages (I mean I can't see any).

I forgot to mention my hardware, it can be helpful:

Amiga 4000/040 Desktop with 4MB Fast ram (soon will become 16MB), CyberVision 64 4MB.
So the floppy disk unit is a High Density 1.76 MB which I think is capable to read 1.44 PC format too.

Mauro

Mauro

[Mauro73]

I've opened the shell and typed "info".

The CD-ROM is mounted and works fine but PC0: is not mounted.

So I've typed "Mount PC0:" and the PC formatted floppy appeared on the desktop.

I think I'm going to add "Mount PC0:" into the startup-sequence, what do you think?

Mauro

[Mauro73]

OK guys, solved!!

For some unknown reason copying PC0 from storage/dosdrivers to devs/dosdrivers using AOS GUI did not copy the .info file.

So I've opened DirectoryOpus and copyed it by hand.

After restarting the system everything gone ok  :-D

Thank you for all your precious suggestions and I beg your pardon for having made you waste your time behind this stupid issue.

Thank you everybody

Mauro