Amiga 2000 video problem

[rkauer]

@Gwion:

 1- Are you 100% sure you're using a PAL Amiga and A520?

 2- The Amiga is set to PAL? What A2000 version you have?

 3- For 100% sure: the A/V is routed from the side RCA connector (Video out)?

 4- Are using the "tick" signal (J012 set to "external") in a 50Hz voltage system (outlet frequency)? 50Hz Amigas will experience not-so-funny behaviour other way.

 5- Did you try a game or in Workbench? Workbench screenmode is set to more than 2 colours?

[Gwion]

1- Yes its a PAL A520

2- It says 6.2 but looks like a 6.4

3- Yes thats the connector im Using

4- Dont know i'll check

5- Game is exactly the same

rkauer wrote:
@Gwion:

 1- Are you 100% sure you're using a PAL Amiga and A520?

 2- The Amiga is set to PAL? What A2000 version you have?

 3- For 100% sure: the A/V is routed from the side RCA connector (Video out)?

 4- Are using the "tick" signal (J012 set to "external") in a 50Hz voltage system (outlet frequency)? 50Hz Amigas will experience not-so-funny behaviour other way.

 5- Did you try a game or in Workbench? Workbench screenmode is set to more than 2 colours?

[Gwion]

I cant find J012.
Where is it?

[Zac67]

J102 is right next to Agnus and the crystal.

_TICK doesn't matter here at all, it's there to provide a stable time base for the CIA counters in case you switch vertical frequency (which is used in A1000 & A500).

Why don't you use the composite out from the motherboard?

[Gwion]

The composite out on the motherboard is in grays i want colour.
The J102 is there it just doesn't have the pins.

[Zac67]

Open J102 is PAL, so either just leave it open or cut the trace.

[CLS2086]

why don't you buy a RGB scart ?
do you want to record something ?
How is the F5 fuse ?

[Gwion]

F5 fuse?

[Gwion]

 :bump:

[CLS2086]

Hi
CM on AMiga-Hardware

the green resistor like between the 2 connectors on top right

[orange]

I doubt it he would have any output on modulator if the fuse was blown, I didn't (IIRC it was the +12V fuse)

[Gwion]

what does the +12V power? GFX?

[RiP]

I have the same problem
Just bought an Amiga 500 with A520 which works fine, colored output.
But when I connect it to my Amiga 2000 rev6, it gives me grayscale output

[RiP]

I have the same problem
Just bought an Amiga 500 with A520 which works fine, colored output.
But when I connect it to my Amiga 2000 rev6, it gives me grayscale output

[magnetic]

Either your A520 is PAL and your using ntsc or vice versa. A2000s DO NOT change pal/ntsc with just jumper its the a4k that has that feature. Your problem is def PAL/NTSC

[magnetic]

I have the same problem
Just bought an Amiga 500 with A520 which works fine, colored output.
But when I connect it to my Amiga 2000 rev6, it gives me grayscale output

Wrong agnus version...