Welcome, Guest. Please login or register.

Author Topic: can any one help........none amiga question?  (Read 1864 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show only replies by carvedeye
can any one help........none amiga question?
« on: March 10, 2008, 09:21:54 PM »
Hi i know this has nothing to do with an amiga but i have just built a new system with an xblade case and havent the foggiest idea of how to connect the front usb and audio ports The motherboard im using is a GA-M57SLI-S4 board if any one can help i would be ever so gratefull
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline Flashlab

  • Hero Member
  • *****
  • Join Date: Aug 2005
  • Posts: 1396
    • Show only replies by Flashlab
Re: xblade case........none amiga question?
« Reply #1 on: March 10, 2008, 09:25:14 PM »
Wrong forum section and every motherboard and tower comes with a  :rtfm: !

Sorry to be so blunt, but come on!
Amiga 4000D Cyberstorm PPC 060@50 604@200 SCSI 130Mb Ram G-Rex Voodoo3 PicassoIV Paloma Ariadne Delfina Lite

Online Flash version of BoulderDash: Offline...
 

Offline amipac

  • Newbie
  • *
  • Join Date: Feb 2008
  • Posts: 37
    • Show only replies by amipac
Re: xblade case........none amiga question?
« Reply #2 on: March 10, 2008, 09:36:34 PM »
The usb cable of the case panel must have some V+, V-,GND, etc signs. If you don't have the manual of your motherboard, go here GA-M57SLI-S4 (rev1.0) manual and download it.
Note: It is better first to check which m/b rev. you have (1.0, 1.1 or 2.0).
After that just follow the connection schematics on your manual. Good luck  :-)
[color=003366]A1200[/color] 030/28MHz 8MB, Kick3.0, WB3.0 Greek, 4GB CF, 350W ATX PSU.
[color=003366]A2000[/color] rev.4, 1MB Ram, 2FDD, 1084S monitor.
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show only replies by carvedeye
Re: xblade case........none amiga question?
« Reply #3 on: March 10, 2008, 10:25:10 PM »
@flashlab

i am well aware of the forum be amiga related only but the manual for my board does not match the the front usb and audio lead connectors they are different (i have also attached jpeg images to my thread are they visable?)
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline amipac

  • Newbie
  • *
  • Join Date: Feb 2008
  • Posts: 37
    • Show only replies by amipac
Re: xblade case........none amiga question?
« Reply #4 on: March 10, 2008, 10:53:56 PM »
Quote

carvedeye wrote:
(i have also attached jpeg images to my thread are they visable?)


I don't see any images here m8   :roll:

EDIT
-----
I just checked the source code of this page and found that you inserted images with your local hard disk's url. You have to upload to a free photo hosting server and then insert the url here.
Alternate method is to use Rapidshare.com or megaupload.com etc to upload and paste here the link.  :-)
[color=003366]A1200[/color] 030/28MHz 8MB, Kick3.0, WB3.0 Greek, 4GB CF, 350W ATX PSU.
[color=003366]A2000[/color] rev.4, 1MB Ram, 2FDD, 1084S monitor.
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show only replies by carvedeye
Re: xblade case........none amiga question?
« Reply #5 on: March 11, 2008, 11:03:08 AM »
sorry i havent given much detail here...i have now managed to get the front usb ports connected but still cant get the front audio.

here is what the manual says
pin1 mic2_l
pin2 gnd
pin3 mic2_r
pin4 -acz_det
pin5 line2_r
pin6 fsense1
pin7 faudio_jd
pin8 nopin
pin9 line2_l
pin10 fsesnse2

here is what the front audio leads say (in no perticular order)
mic-in
ground
return L
spkout R
spkout L
return R
mic-bias

if any one could help?
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline persia

  • Hero Member
  • *****
  • Join Date: Sep 2006
  • Posts: 3753
    • Show only replies by persia
Re: xblade case........none amiga question?
« Reply #6 on: March 11, 2008, 03:07:34 PM »
The manual from your board tells you to post in the wrong area of amiga.org?  Now, that's a strange manual!


Quote

carvedeye wrote:
@flashlab

i am well aware of the forum be amiga related only but the manual for my board does not match the the front usb and audio lead connectors they are different (i have also attached jpeg images to my thread are they visable?)
:rtfm:
[SIGPIC][/SIGPIC]

What we\'re witnessing is the sad, lonely crowing of that last, doomed cock.
 

Offline persia

  • Hero Member
  • *****
  • Join Date: Sep 2006
  • Posts: 3753
    • Show only replies by persia
Re: can any one help........none amiga question?
« Reply #7 on: March 11, 2008, 03:09:55 PM »
What your manual should say is to post the question in the Alternative Operating Systems section of the board.  

http://www.amiga.org/forums/forumdisplay.php?f=10


[SIGPIC][/SIGPIC]

What we\'re witnessing is the sad, lonely crowing of that last, doomed cock.
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show only replies by carvedeye
Re: can any one help........none amiga question?
« Reply #8 on: March 11, 2008, 06:02:44 PM »
@ persia
        i see what you mean lol i wil go and do that now
sorry for being a pain the a**
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3