Power Icons

[weGuru]

Can i use Powericons in mye 040@40mhz?

[AmiKit]

Sure. Or try AfA_OS - it should make your computer faster.

[weGuru]

Afa OS? A new OS or just a better OS 3.9?

[AmiKit]

It's a re-implementation of some enhanced AROS routines into OS3.9. The AfA_OS supports PNG icons too.

[weGuru]

I just install it in OS 3.9?

[motorollin]

Yes. Install AfA then you can remove PowerIcons, VisualPrefs and any separate TTF font engine (if you have one).

--
moto

[AmiKit]

I just install it in OS 3.9?

Simply follow the installation instructions included in the archive.

[weGuru]

All installed...Now for the 32bit icons...Any packages with the toolkits intact?

[AmiKit]

http://www.five-star.com/
http://www.lorraine-design.com/

[weGuru]

the 32bit icons turn off after reboot...and wont show at all anymore...

[AmiKit]

Make sure the morelibspace is the first command in your startup-sequence. If so, turn the Amiga off and on as the simple reboot is not enough for morelibspace.

[weGuru]

Seems that Afa_Os dont start with icon support..I can use Powericons and 32bit png shows

[AmiKit]

Make sure everything was installed and check the manual for more information. It works here.

[weGuru]

checked everything....No support for png icons...Should i just install Powericons instead?

[AmiKit]

Check whether the SYS:AfA_OS_Libs folder exists and all the libraries are there. If you installed the AfA_OS_Libs folder into different location make an assign AfA_OS_Libs: pointing to the location.

Also the AfA_OS_Loader should be started right after C:AddDataTypes line in your startup-sequence. Then turn off your Amiga and start it again.

Un-install AfA_OS and install PowerIcons instead if it doesn't help.