Looking for Blizzard PPC repair

[easy_john]

Whether who knows, is remained in 2008 on the Earth a place where I can repair Blizzard PPC accelerator?

I have a Blizzard PPC 240/60/scsi, which has simply refuse to start one day. It does not react neither to 2 keys of a mouse, nor on "2" or "Esc". Only the black screen (and looks like continuous reset every 5-10 second).
Board looks ok, no burning tracks, all chip about normal work temperature.
I clean trapdoor slot, add power to board, but it not helps.


PS. Sorry for my English.

[Gavilan]

My friend...try Amiga Center France

The BEST place to repair PPC cards...for sure!!



Greetings

Sebastian

[Kin-Hell]

easy_john wrote:
Whether who knows, is remained in 2008 on the Earth a place where I can repair Blizzard PPC accelerator?

I have a Blizzard PPC 240/60/scsi, which has simply refuse to start one day. It does not react neither to 2 keys of a mouse, nor on "2" or "Esc". Only the black screen (and looks like continuous reset every 5-10 second).
Board looks ok, no burning tracks, all chip about normal work temperature.
I clean trapdoor slot, add power to board, but it not helps.

PS. Sorry for my English.

If you have a Monitor in the Amigas RGB port, Have you just tried tunrning the Monitor on before you turn on the Amiga?
I too get just a black screen with the Amiga Crashing over & over with the Amigas Power LED flashing. Turn everything off, power monitor on, then the power on the Amiga & she boots fine.
Just a thought for you. I thought I too had a Dead Amiga when I saw this for the first time.
With a 5-10 second delay on the Reset, perhaps this isnt your problem. :-?
Best of luck.  :-)  

[easy_john]

I try with monitor on bvision, and witout bvizion, with rgb moniir, and with composite on tv - result is always same.
I try with different a1200 mainboard - the same.
Yes Power LED flashing every 5-10 seconds.

[Kin-Hell]

What if you take out the BVision & the PPC card?
Can you try another PSU?

[easy_john]

sorry, dont andestand what do you mean "take out"
yes, i try start with another two PSU, and on another motherboard (all MB work fine as single and with Blizzard 1230/IV).

[Plaz]

"take out" >  извлекайте  


мой друг babelfish.altavista.com  :-)


Plaz

[easy_john]

Plaz wrote:
"take out" >  извлекайте  
мой друг babelfish.altavista.com  :-)
Plaz

спасибо, конечно. но
1.я ленив
2. к тому же часто читаю/пишу с пда. да и вообще предпочитаю translate.ru
but this is offtopic...

[Plaz]

вы говорите нам A1200 работает когда PPC извлекается?

1. Лениво? Нет. Вы выучили количество английской языка.
2. Да, я понимаю причину.  :-) вы оплачиваете для translate.ru?

Plaz

[easy_john]

Plaz wrote:
вы говорите нам A1200 работает когда PPC извлекается?

yes. i have checked up on two working devices.

1. Лениво? Нет. Вы выучили количество английской языка.

my god! i am at a loss to understand sense of this phrase.

2. Да, я понимаю причину.  :-) вы оплачиваете для translate.ru?

this phrase the same is complex for understanding.
if it is a question of payment translate.ru translates small phrases free of charge, besides additional dictionaries are accessible to the registered users.

[Plaz]

After your tests, it does appear your PPC card needs repair.  Amiga Center would be your best hope.

i am at a loss to understand sense of this phrase.

Sorry. Maybe...
вы не ленивы если вы изучаете английскую язык

if it is a question of payment translate.ru translates small phrases free of charge

Yes, that is the answer to my question.

Plaz

[Argus]

@easy john

Privyet!

What Plaz was trying to explain (I think):

If your A1200 works without the Blizzard installed

and

with the Blizzard you get a black screen it's probably the cpu (68060) contacts on the card.  The 68060 probably has a cold solder contact that needs resoldering.  The problem may not even be visible as it could be under the 68060 itself.

If you're not good at de-soldering such a big chip and resoldering it; send it to Amiga Centre in France (Jean Jacques Boulet can do it for you).

ydachi vam

paka

[easy_john]

Argus wrote:
What Plaz was trying to explain (I think):
If your A1200 works without the Blizzard installed

yes.

and
with the Blizzard you get a black screen it's probably the cpu (68060) contacts on the card.  The 68060 probably has a cold solder contact that needs resoldering.  The problem may not even be visible as it could be under the 68060 itself.
If you're not good at de-soldering such a big chip and resoldering it; send it to Amiga Centre in France (Jean Jacques Boulet can do it for you).

yesterday I have written e-mail in "Amiga Centre in France", but still have no answer.

ydachi vam

thanks

paka

poka.
сan be sounds as "paka", but it is written "poka".

[easy_john]

Sorry. Maybe...
вы не ленивы если вы изучаете английскую язык

almost superb.
except for "английск_ую_". it can be "английскую речь" or "английский язык", but not "английскую язык".
it gives out machine translation, the person can admit a typing error, but not mix declension.

[Plaz]

What Plaz was trying to explain (I think):

Yes. I was trying to make him feel welcome by using Russian, instead I think I insulted his sister. :-P

Plaz