FPM SIMMS. Are amiga Compatible?

[Fransexy_]

Are the FPM SIMMs compatible with blizzard cards or they must be EDO SIMMs?

[Caius]

The 1230IV at least can take both. See if you find the manual for yours at the Unofficial phase5 Support Page.

[Fransexy_]

It´s for Blizzard PPC.I have the printed manual but it not mention nothing About the memory compatibility for FPM or EDO.

[bloodline]

No Amiga Accelerator used either feature, so don't worry... :-)

[zipper]

..except ACL 1200XL...(EDO)

..almost forgot, QuikPak 060 for A3000/4000, too...

[mel_zoom]

Im pretty sure my 1230 is using FPM memory so Id say yes.

[alexh]

FPM is the preferred RAM for Amiga accelerators.

[bloodline]

zipper wrote:
..except ACL 1200XL...(EDO)

..almost forgot, QuikPak 060 for A3000/4000, too...

All info I can find only says that EDO will work... not that the Feature is used... I seriously doubt any Amiga Memory controller uses FPM or EDO...

[adolescent]

@bloodline

The Quickpak 060 does.

http://www.hd-zone.com/amiga/quickpak.html

[bloodline]

adolescent wrote:
@bloodline

The Quickpak 060 does.

http://www.hd-zone.com/amiga/quickpak.html

From the benchmarks, it does seem that the Quickpak does use the EDO feature... that would make sense, as the Quickpak is the newest of the Accels...

[zipper]

All info I can find only says that EDO will work... not that the Feature is used... I seriously doubt any Amiga Memory controller uses FPM or EDO...

Read the test of 1200XL  :-D  Don't remember if it was CU or AF, BUT 1200XL was the fastest 030/50 accelerator (using EDO features), and the only one which did over 10 MIPS on SysInfo AFAICR