AmiFTP

[P1nd-112]

Hi.. after some hours work, i now can connect to my pc via ftp, from my amiga ! But the filetransfers i running real slow.. what to do ?

[Caius]

How are you connected? Ethernet? Null modem cable? Something else?

[P1nd-112]

10 Mbit ethernet pmcia card !

[odin]

What kind of Amiga/OS/CPU/TCP-IP stack/FTP client?

Your network connection or CPU is most likely the bottleneck.

[adolescent]

How slow?  The PCMCIA is not too fast, especially with a slow processor.

[P1nd-112]

I have an Amiga 1200D With blizzard 1220/4. CPU i don't know Amiga OS3.9 running Genesis and samba, using Amiftp..  (Server running on pc is Gene6 Ftp server)


Edit: I can see in my ftp-server log on the PC, the fastest transfer was 2 kb/sec ?

[Caius]

2KB/sec doesn't sound right at all. I don't know Gene6, but many FTP servers allow you to specify a bandwidth limit. Perhaps it has some low default setting?

[P1nd-112]

No it's really slow ! Gene6 is setup to run 100mbit.. i did a pc to pc transfer, and it runs perfect with 10 Mb/sec as it should !


Edit: Did a reboot on the amiga, now it works fine ! 1.6 mb file in 2 secs weeee !

Thanks for help anyway !

[Braddo]

P1nd-112 wrote:
No it's really slow ! Gene6 is setup to run 100mbit.. i did a pc to pc transfer, and it runs perfect with 10 Mb/sec as it should !


Edit: Did a reboot on the amiga, now it works fine ! 1.6 mb file in 2 secs weeee !

Thanks for help anyway !

800k/sec? I doubt that very much.

[rkauer]

Braddo wrote:
800k/sec? I doubt that very much.

 This is normal when running FTP. But I wonder how the poster achieve to install 3.9 on a 1200 with a 1220/4 (68EC020 + 4Mb).

 The OS probably crawl on such a humble accelerator like that.

[P1nd-112]

it runs fine, but when i'm running genesis, there not much ram left ! But it runs ! And yes, i tryed again, and it transfers 1.6 MB (WHDLoad_dev 1.68) in 2-3 secs !