Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: 1 [2]   Go Down

Author Topic: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)  (Read 4343 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #14 from previous page: January 24, 2008, 11:53:05 PM »
Well I managed to dig up a set of 2.05 WB disks (of which I didn't think I had) and can't work out how to install it on one of my 2.1GB drves. It reads it ok but I can get the partition to appear on the Workbench to format. I tried to follow the A1200 method as close as possible but no luck. Are there any tutorials?
Logged
 

Offline Colani1200

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 707
    • Show only replies by Colani1200
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #15 on: January 25, 2008, 08:47:13 AM »
Quote

skurk wrote:
I have a 40GB hdd in my A600/kick 3.1 without any issues.

Did you need any patches for that (e.g. patched scsi.device or something)?

@tokyoracer: Did you already partition the drive with HDToolBox or HDInstTool? What is you partition layout?
Logged
 

Offline skurk

  • Hero Member
  • *****
  • Join Date: Dec 2006
  • Posts: 929
    • Show only replies by skurk
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #16 on: January 25, 2008, 09:04:26 AM »
Quote

Colani1200 wrote:
Quote

skurk wrote:
I have a 40GB hdd in my A600/kick 3.1 without any issues.

Did you need any patches for that (e.g. patched scsi.device or something)?


No, it was "plug and play".  I don't use the entire disk (yet), and all my partitions are <4GB each.
Logged
Code 6502 asm or... DIE!!

[C64, C128, A500, A600, A1200, A3000, MBP+Mini, Efika/MOS2.1, Sam440 w/AOS4.1
 

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #17 on: January 25, 2008, 11:36:40 AM »
@ Colani1200, I used HDToolbox and is only 1 partition (DH0). does it only work with 2?
Logged
 

Offline Colani1200

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 707
    • Show only replies by Colani1200
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #18 on: January 25, 2008, 11:57:17 AM »
If the partition is smaller than 4GB (which naturally is the case on a 2.1 GB disk), it should work... Was the size correctly shown by HDToolBox?
Logged
 

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #19 on: January 25, 2008, 01:14:14 PM »
About 2098MB or something close.
Logged
 

Offline skurk

  • Hero Member
  • *****
  • Join Date: Dec 2006
  • Posts: 929
    • Show only replies by skurk
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #20 on: January 25, 2008, 01:30:02 PM »
Quote

Colani1200 wrote:
If the partition is smaller than 4GB (which naturally is the case on a 2.1 GB disk), it should work... Was the size correctly shown by HDToolBox?

Not in HDToolBox, but HDInst got it right.
Logged
Code 6502 asm or... DIE!!

[C64, C128, A500, A600, A1200, A3000, MBP+Mini, Efika/MOS2.1, Sam440 w/AOS4.1
 

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #21 on: January 25, 2008, 01:39:25 PM »
I will give that a go, thanks. :-)
Logged
 

Offline tokyoracerTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 1590
    • Show only replies by tokyoracer
Re: WTB: 40MB or less 2.5" Hard Disk and WB2.# Disks (including Install)
« Reply #22 on: January 25, 2008, 07:38:01 PM »
Ok I have tried HDToolbox but it's no good. It's seems fine of the A1200 but on the A600 it turns German and comes up with an error after it loads up, then it quits on "ok". I can't even get it to work on the normal HDToolbox as it seems to work at first glance but doesn't warm re-boot when you save changes and I can't seem to Ctrl, A, A with it aswell. Once it did work (don't know how I managed it) and did come up with partitions but as soon as I asked it to format I got an error "Insert DF0 Disk" or something like that.
It seems Amiga error's often don't help very much at all most of the time. :madashell:
Logged
 
Pages: 1 [2]   Go Up
« previous next »