I'm reviving an A3000 that I bought recently (semi-complete). After putting in some spare CIAs (which weren't onboard), I fired it up for the first time with a VGA monitor connected.
Now everything seems fine, I get into some Kickstart menu (the machine has 1.4 roms installed on board) where I can choose between 1.3 and 2.x, but when I insert a floppy and click on either of the 2 kickstart version buttons, a grey screen appears with orange letters saying:
"Error can't get memory! Reboot system"
On the mainboard the CHIP ram is fully populated, and there is no FAST ram (unfortunately).
Anyone know what causes this error? Do I need to set a jumper to a different position, and if so: which one(s)?
EDIT: the problem seems gone when after I plugged in the SCSI cable of the harddisk. However, the harddisk says "not a DOS disk", and when I boot from a 1.3 disk that I found, it starts booting, but halfway it returns an error "unknown command resident", and then stops. I've tried it with 2 different WB1.3 versions (1.3 and 1.3.2)