Welcome, Guest. Please
login
or
register
.
Forums
Forums
Board
Topic
Home
Today's Posts
Gallery
Login
Register
Amiga.org
»
Amiga computer related discussion
»
Amiga Hardware Issues and discussion
»
SIMM module for Blizzard 1230IV
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: SIMM module for Blizzard 1230IV (Read 1636 times)
Description:
0 Members and 1 Guest are viewing this topic.
Caius
Sr. Member
Join Date: Nov 2007
Posts: 294
SIMM module for Blizzard 1230IV
«
on:
January 08, 2008, 02:51:30 PM »
Has anyone tried the following 128 MB SIMM from MemoryTen in a Blizzard 1230IV (in standard A1200 case)?
http://www.memoryx.net/32mbx326e.html
What I'm wondering is: Does it work? If so, does it seat properly without using a rubber band or other kludge? Can the trapdoor be properly closed with the SIMM installed?
From what I can gather it has the right specs, is 1 inch in height, and is double sided.
Alternatively, do you know anywhere else I can get a 128MB SIMM that is known to work in this card, and at a reasonable price?
Logged
Theology is just a debate over who to frame for creating reality.
Hodgkinson
Hero Member
Join Date: Apr 2006
Posts: 1080
Re: SIMM module for Blizzard 1230IV
«
Reply #1 on:
January 08, 2008, 03:28:19 PM »
I'd like to know, too. I contacted a small computer shop down south in the UK (Clinton Computers) about their 128MB EDO SIMMS, but it turns out that their website is out of date - They said that all they have now is 32MB SIMMS.
Hodgkinson.
Logged
Main A1200D: WB3.0, 3.1 ROMs, 2GB HDD, Blizzard 1230IV (64MB RAM + FPU) and a whole load of custom heatsinks... :flame:
ZeBeeDee
Hero Member
Join Date: Jan 2007
Posts: 1081
Re: SIMM module for Blizzard 1230IV
«
Reply #2 on:
January 08, 2008, 04:37:01 PM »
I used a plastic zip tie on mine (Purchased via Ebay from The Belgium Amiga Club) pulled just tight enough to hold it in place ... The SIMM is a double-sided one that sticks out a bit more than the recommended specs.
I can't say for sure if you will be able to close the trapdoor using the one you mention in the OP but I'm leaning towards no ...
Logged
To err is human ... to BOING divine!
[SIGPIC][/SIGPIC]
Caius
Sr. Member
Join Date: Nov 2007
Posts: 294
Re: SIMM module for Blizzard 1230IV
«
Reply #3 on:
January 08, 2008, 05:11:48 PM »
I will probably just buy one and try, since USD 49.95 is a good price. Lifetime warranty and all. I'll post my results here.
Logged
Theology is just a debate over who to frame for creating reality.
Orjan
Hero Member
Join Date: Sep 2003
Posts: 515
Re: SIMM module for Blizzard 1230IV
«
Reply #4 on:
January 08, 2008, 05:47:11 PM »
Quote
Caius wrote:
Lifetime warranty and all.
Hehe.. Futurama flashback
"This card has expired.."
"But it´s good for a lifetime!"
"Well, yours expired.."
:lol:
Logged
\\"Memory is like an orgasm. It\\\'s a lot better if you don\\\'t have to fake it.\\"
- Seymore Cray, on virtual memory.
rkauer
Hero Member
Join Date: May 2006
Posts: 3263
Re: SIMM module for Blizzard 1230IV
«
Reply #5 on:
January 08, 2008, 07:01:09 PM »
Prefer those two types:
http://www.memoryx.net/94g6682.html
and
http://www.memoryx.net/apl72p128.html
Those are FPM SIMM, but are totally electrical compatible with any Amiga board (who supports 128Mb banks, of course).
Maybe they don't sit perfectly in your accelerator. They sit in mine (Microbotics MBX1230XA).
Logged
Goodbye people.
I\'ll pop on from time to time, RL is acting up.
Caius
Sr. Member
Join Date: Nov 2007
Posts: 294
Re: SIMM module for Blizzard 1230IV
«
Reply #6 on:
January 09, 2008, 06:19:15 PM »
@rkauer
Thanks for the tip. I think I'll go for the Apple one, simply because it looks smaller than the IBM one.
Logged
Theology is just a debate over who to frame for creating reality.
tekopaa
Newbie
Join Date: Jan 2008
Posts: 28
Re: SIMM module for Blizzard 1230IV
«
Reply #7 on:
January 09, 2008, 06:29:29 PM »
http://www.thomann.de/gb/simm_64mb_ps2.htm
maybe these 64mb will fit. They deliver to EU area maybe other place 2
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Amiga.org
»
Amiga computer related discussion
»
Amiga Hardware Issues and discussion
»
SIMM module for Blizzard 1230IV
There was an error while thanking
Thanking...