Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Dataflyer 1200 question....  (Read 1082 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline corsavertTopic starter

  • Jr. Member
  • **
  • Join Date: Aug 2004
  • Posts: 96
    • Show only replies by corsavert
Dataflyer 1200 question....
« on: November 26, 2007, 11:40:41 PM »
Installing Dataflyer 1200, driver installed and now formatting 550mg hd. Question - it's at "Writing RDB-Blocks".... how long should this take? It's been at it an hour already....
Logged
A1200/MB1230-50Mhz/128MB/80GB/3c589/Dataflyer SCSI+/OverdriveCD/SCSI CD/Diamondscan
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show only replies by rkauer
Re: Dataflyer 12000 question....
« Reply #1 on: November 26, 2007, 11:48:02 PM »
 Look like you have a termination problem to me.

 Check (or re-check) the terminators.
Logged
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline corsavertTopic starter

  • Jr. Member
  • **
  • Join Date: Aug 2004
  • Posts: 96
    • Show only replies by corsavert
Re: Dataflyer 12000 question....
« Reply #2 on: November 27, 2007, 03:31:11 AM »
It's working!!! I had two problems....

Needed to BOOT from the Dataflyer install disk to run the partition & format... not just launch the utility from my own WB.

Once formatted, 3.1 couldn't access the 4gb (actually something like 4068mb) drive - too big I guess.

A 540mb drive then worked fine...
Logged
A1200/MB1230-50Mhz/128MB/80GB/3c589/Dataflyer SCSI+/OverdriveCD/SCSI CD/Diamondscan
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show only replies by rkauer
Re: Dataflyer 12000 question....
« Reply #3 on: November 28, 2007, 05:32:15 AM »
 Real SCSI drives don't have the 4Gb barrier issue! It only happens in IDE devices.

 But the FFS you have could be the problem. Use only to a bit less than 2Gb each partition.
Logged
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 
Pages: [1]   Go Up
« previous next »