Mediator Board with Video Toaster 4000 & Toaster Flyer

[terminator4]

Hi,
I'm wondering if anyone has got it to work with VT4000 and Toaster Flyer?
thanks in advance.

[Matt_H]

The timings required by the Toaster are extremely precise, so it's probably hit or miss if it'll work. Software-wise, you'll almost definitely need a separate bootable partition without the Mediator stuff on it.

Remember that only the tower versions of the Mediator actually have/allow access to a video slot.

[terminator4]

Hi,
do you have it setup???

[terminator4]

Also wondering if its possible to have a 90 degree connector (to buy from somewhere), this way I can use high flyer card in a tower... :-P

[terminator4]

I was also suspicious - about mediator and the video toaster timings...  however can you say this with more certainty?? (do you have or have you attempted such a setup?)

[Tigger]

The Toaster is on the video slot which is basically the 23 pin video port, the parallel port and the two audio channels (plus some other lines) on a slot.   I can't imagine how the mediator could effect it.   The Flyer is basically a complete computer on a card hooked to the zorro-II bus (and uses very little of that bandwidth), so I dont think it likely the mediator will effect it either.
    -Tig