Welcome, Guest. Please login or register.

Author Topic: How to set it up RIGHT  (Read 1156 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline A1200PowerTopic starter

  • Full Member
  • ***
  • Join Date: Mar 2004
  • Posts: 110
    • Show only replies by A1200Power
    • http://Iets met chello :-)
How to set it up RIGHT
« on: October 02, 2007, 04:58:04 PM »
Hi you all,

Got a nice 4000 Elbox tower setup but i need some tricks and tips of setting it up the right way

The tower houses the following equipment,

Cyberstorm ppc233/060@50
Cybervision 64/3d sd/ff
X-surf
Toccata
Ioblix
Vlab motion

The tower is installed with 0s3.9 and BB2

The next choice would be te graphic system, cybergrfx 3 works fine but 4.0 screws up my TFT screen. So i guess it's back to 3

Anyway how do i set it up to get some nice icons, sounds and warpos V5 should i install it and how?

Got a clue anyone?

Thanx

#A500+ / GVP030@40MHZ / MULTIVISION 500
#1200 / BLIZ 030@50MHZ
#1200T / BLIZ 030@50MHZ / IOBLIX / PICOLLO SD64
#4000D / CS060@50MHZ / STILL ORIGINAL WHITE
#4000D / 040 / FRAMEMACHINE
#4000T / PPC233+060 / CV64/3D / MULTI IO / VLAB-M
 

Offline Matt_H

Re: How to set it up RIGHT
« Reply #1 on: October 02, 2007, 05:37:18 PM »
If you're using CGX4, make sure it's the latest version. Others are buggy with 3.9BB2. Be sure your monitor settings are correct in CGXMode as well.

Icons and sounds are a matter of personal preference. Aminet's got a whole bunch to choose from. You might want PowerIcons for PNG compatibility.

For WarpOS, just run the installer. You'll have to do this once for the base system and then again for the last update.
 

Offline A1200PowerTopic starter

  • Full Member
  • ***
  • Join Date: Mar 2004
  • Posts: 110
    • Show only replies by A1200Power
    • http://Iets met chello :-)
Re: How to set it up RIGHT
« Reply #2 on: October 06, 2007, 08:47:46 AM »
Thanks fot the tip, i did found it on aminet. It works now the only thing is that i cannot ad a own monitor because it doesn't save the setting when i modify them. This is when i use the cybergrapfx tools to modify screen refresh rates eg.

Greetz Amigapower.
#A500+ / GVP030@40MHZ / MULTIVISION 500
#1200 / BLIZ 030@50MHZ
#1200T / BLIZ 030@50MHZ / IOBLIX / PICOLLO SD64
#4000D / CS060@50MHZ / STILL ORIGINAL WHITE
#4000D / 040 / FRAMEMACHINE
#4000T / PPC233+060 / CV64/3D / MULTI IO / VLAB-M
 

Offline stopthegop

  • Hero Member
  • *****
  • Join Date: Feb 2006
  • Posts: 831
    • Show only replies by stopthegop
Re: How to set it up RIGHT
« Reply #3 on: October 06, 2007, 11:50:55 AM »
If you have a Mediator, the first thing you should do is get yourself a Voodoo card.  
Primary:
A4000T. Phase5 PPC604e-233mhz/060-66mhz. Mediator, Z3 Fastlane, Voodoo5, Delfina, X-Surf, AD516, Peggy Plus.

Collection:
A4000D, A1200, A500, Milan060 (Atari clone), Atari MegaSTE, Atari TT030, C64, C128, Mattel Aquarius, (2) HP Jornada....
 

Offline Matt_H

Re: How to set it up RIGHT
« Reply #4 on: October 06, 2007, 07:39:31 PM »
@ A1200Power

Actually, I seem to recall a bug in the CGX4 installer in that it forgot to copy an icon for the CVision3D driver in Devs:Monitors. Make sure you have one (just duplicate from another driver) otherwise some settings won't stick.