Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: RocTec: RocHard 800C  (Read 2356 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline sy278Topic starter

  • Newbie
  • *
  • Join Date: Sep 2007
  • Posts: 18
    • Show only replies by sy278
RocTec: RocHard 800C
« on: September 17, 2007, 03:13:54 PM »
Hi Guys,

Does anyone out there have one of these drives or even had one who can remember what the the I and II positions are for on the power switch?

I have the DIP switch settings from http://www.amiga-hardware.com/showhardware.cgi?HARDID=571 but cant recall the rest of it.

Here is the switch I'm talking about:







Cheers.
Logged
 

Offline 1NOM155

  • Full Member
  • ***
  • Join Date: Jul 2006
  • Posts: 184
    • Show only replies by 1NOM155
Re: RocTec: RocHard 800C
« Reply #1 on: September 17, 2007, 03:24:31 PM »
can you take a picture on the rear switch (inside the box), the wires and below the board wear the wires connect???

i may have a clue...
Logged
3 x Amiga 500 REV. 6A, ROM 1,3 v34.5 (1991) (All Working)
1 x Amiga 600 REV. 1.5, ROM 2,05 v37.300 (1991) (Stand-by for install a Toshiba HDD2718, 2167MB)
----------------
WTB Amiga 1200 or  Amiga 3000 D & T or 4000 D & T.
Any one to sell to Europe?
 

Offline sy278Topic starter

  • Newbie
  • *
  • Join Date: Sep 2007
  • Posts: 18
    • Show only replies by sy278
Re: RocTec: RocHard 800C
« Reply #2 on: September 17, 2007, 03:25:49 PM »
Will do will post them later on, at work just now.
Logged
 

Offline 1NOM155

  • Full Member
  • ***
  • Join Date: Jul 2006
  • Posts: 184
    • Show only replies by 1NOM155
Re: RocTec: RocHard 800C
« Reply #3 on: September 18, 2007, 01:43:15 AM »
Quote

sy278 wrote:
Will do will post them later on, at work just now.



any luck?
Logged
3 x Amiga 500 REV. 6A, ROM 1,3 v34.5 (1991) (All Working)
1 x Amiga 600 REV. 1.5, ROM 2,05 v37.300 (1991) (Stand-by for install a Toshiba HDD2718, 2167MB)
----------------
WTB Amiga 1200 or  Amiga 3000 D & T or 4000 D & T.
Any one to sell to Europe?
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show only replies by rkauer
Re: RocTec: RocHard 800C
« Reply #4 on: September 18, 2007, 03:27:48 AM »
 I think the external I-0-II switch is intended to choose:

 - IDE hd (or only memory)
 - off
 - SCSI HD

 This is a wild guess, but anyway this is the driver install floppy, in .DMS format (thanks to Amiga Installer's Heaven).
Logged
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline 1NOM155

  • Full Member
  • ***
  • Join Date: Jul 2006
  • Posts: 184
    • Show only replies by 1NOM155
Re: RocTec: RocHard 800C
« Reply #5 on: September 18, 2007, 11:53:43 AM »
the "only memory", cant be, because they have a proper switch (the red ones)  :-D

Switch     Function
1    Enable / Disable Hard Drive
2    Enable / Disable RAM
3    Kickstart 1.2 / Kickstart 1.3
4    Reserved
5    Reserved
6    SCSI ID 0xx / 1xx
7    SCSI ID x0x / x1x
8    SCSI ID xx0 / xx1
Logged
3 x Amiga 500 REV. 6A, ROM 1,3 v34.5 (1991) (All Working)
1 x Amiga 600 REV. 1.5, ROM 2,05 v37.300 (1991) (Stand-by for install a Toshiba HDD2718, 2167MB)
----------------
WTB Amiga 1200 or  Amiga 3000 D & T or 4000 D & T.
Any one to sell to Europe?
 

Offline Rattack

  • Newbie
  • *
  • Join Date: Sep 2007
  • Posts: 1
    • Show only replies by Rattack
Re: RocTec: RocHard 800C
« Reply #6 on: September 26, 2007, 03:47:25 AM »
Hello!
I have one... this was taken from the manual:

The Game switch:

0 - Both RAM and the hard drive are disabled
I - Only the hard drive is disabled
II - RAM and the hard drive are both enabled

The DIP switch:

1 - ON: Enable Hard disk / OFF: Disable Hard disk
2 - ON: Enable expansion RAM / OFF: Disable expansion RAM
3 - ON: For Kickstart 1.2 / OFF: For Kickstart 1.3 or higher
4,5,6,7,8 - ON/OFF: Reserved

Regards!
Logged
 
Pages: [1]   Go Up
« previous next »