Welcome, Guest. Please login or register.

Author Topic: Think my powerflyer is faulty  (Read 957 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline GavTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2003
  • Posts: 788
    • Show only replies by Gav
Think my powerflyer is faulty
« on: July 31, 2007, 10:07:33 PM »
Hi
So last night while on the net my amiga crashed and reset,after the rest i got a message "Not a Dos disk in device idgg"

Sooo to cut this story short i took my amiga apart and removed everything..I then replaced all the parts i had removed,powerflyer,mediator,BPPC...

So now i still get the same message and i dont think it is my hard drive because i also used my brothers drive and that wont boot either.
Plus i am unable to get to the ata3 prefs while holding the left mouse button on boot up which makes me think the Powerflyer is at fault. :evil:
A1200,BPPC603e+@240mhz-060@50mhz/Scsi2 192mb,Powerflyer,Mediator SX,Voodoo 3000,SB128,Tv card,SD/FF,Ethernet,CDRW.
 

Offline Vulture

  • Sr. Member
  • ****
  • Join Date: Nov 2005
  • Posts: 310
    • Show only replies by Vulture
Re: Think my powerflyer is faulty
« Reply #1 on: July 31, 2007, 11:24:43 PM »
did u try the hd on A1200's own connector without the flyer? that'll show you if flyer is the problem
 

Offline GavTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2003
  • Posts: 788
    • Show only replies by Gav
Re: Think my powerflyer is faulty
« Reply #2 on: July 31, 2007, 11:53:10 PM »
I cant as my HD is a 3.5 and i dont have a 3.5-2.5 adaptor.
A1200,BPPC603e+@240mhz-060@50mhz/Scsi2 192mb,Powerflyer,Mediator SX,Voodoo 3000,SB128,Tv card,SD/FF,Ethernet,CDRW.