MOS PowerUP : tcp stack???

[keropi]

I have succesfully installed MOS-PUP on my G-REX4000D amiga  :-D

I made a 1.9GB partition (after the OS3.9 1.9GB one) gave it a boot priority of -5 and boot from it from Early start-up menu  :-D
but what tcp stack to install? I wanna reg it now... I tried Genesis from the 3.9 CD , but after installing it, it messed up the system and MOS won't start anymore... (it was searching the execute command to do something) easily fixed...
should I try miamiDX? use it's installer?
any info?
:-?

Amigaz? stopthegop? djbase?  :lol:  

[humppa]

Try MOSnet. It's slightly more difficult to configure, but runs like a treat.

[VooDoo]

heya Keropi..

Here on MOS i using MiamiDX and MosNET both works perfect..and here MiamiDX is faster!!

[keropi]

I installed MOSnet, it works fine....
I ma bugged though because I have an AlgorPRO and I have to keep pressing lmb to boot... bah  :lol:

[Framiga]

VooDoo wrote:
heya Keropi..

Here on MOS i using MiamiDX and MosNET both works perfect..and here MiamiDX is faster!!

MiamiDX is faster? :-? over the net or on your LAN?

[VooDoo]

yeah here is faster..but over the net ..on Lan betwen my Xbox and Amiga MOSNet is faster!  dont know how...but.. ;-)

[Framiga]

try on the net with these settings:

TCP_SendSpace=32768
TCP_RecvSpace=32768

in MOSNet:db/general.config

Probably you will lose some speed on your LAN but over the NET you will gain a lot!

[VooDoo]

Maybe later...Famouse problem whit mouse on MOS is here again  :-(  :-( Maybe I will test it when change my PSU!

[Donar]

keropi wrote:
...I tried Genesis from the 3.9 CD , but after installing it, it messed up the system and MOS won't start anymore...

You have to install the Miami Demo from Aminet and install it with a MUI Gui. The OS3.9 Version is ReAction only.

Don't forget to copy the genesiskey.library from OS3.9 CD to the Libs folder to get it regged.

[keropi]

it did not boot because it needed EXECUTE and ASSING commands from 3.9 ...  :-D