Welcome, Guest. Please login or register.

Author Topic: A1200: Commodore or Escom?  (Read 3729 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline jbuonaccTopic starter

  • Jr. Member
  • **
  • Join Date: Feb 2007
  • Posts: 94
    • Show only replies by jbuonacc
A1200: Commodore or Escom?
« on: May 28, 2007, 05:04:46 AM »
i've got two A1200's here and was thinking about selling one of them. one is an original Commodore model with 'A1200' badge and KS 3.0 installed. the other is an Escom 'A1200HD' with KS 3.1 roms. both are in very nice physical and working condition, though the original HD for the Escom model has died. i do actually have a spare Commodore A1200 case that's in mint condition, so i could swap the guts of either one into that if i wanted. any thoughts on which i should hold onto and for what reason? is the original better?

both have a 4mb expansion installed, i just need to figure out which would be better of the two to keep.

also, are floppy disk drives compatible between the A1200 and an A500?

thanks!
 

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show only replies by Brian
    • http://www.syntaxsociety.se
Re: A1200: Commodore or Escom?
« Reply #1 on: May 28, 2007, 05:59:21 AM »
Floppy diskdrivers are compatible between all Amiga models. What motherboard revisions do they come with?

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show only replies by orange
Re: A1200: Commodore or Escom?
« Reply #2 on: May 28, 2007, 07:09:17 AM »
IIRC Escom used PC floppy drives..
Better sorry than worry.
 

Offline Tahoe

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 971
    • Show only replies by Tahoe
    • http://www.amiga4ever.nl
Re: A1200: Commodore or Escom?
« Reply #3 on: May 28, 2007, 09:08:00 PM »
Escom used PC floppy drives and modified the A1200's mainboard to facilitate these foreign drives. (And they weren't 100% compatible)

Drives between the A500 and A1200 (C= models) are technically compatible, but likely the A500 drive won't physically fit in the A1200.
Greetings from Wilnis, The Netherlands
Now owning ALL Amiga models and most; if not all; flavours of them...My Amiga Museum
 

Offline jbuonaccTopic starter

  • Jr. Member
  • **
  • Join Date: Feb 2007
  • Posts: 94
    • Show only replies by jbuonacc
Re: A1200: Commodore or Escom?
« Reply #4 on: May 28, 2007, 09:55:24 PM »
hmm, so any opinion as to which would be better to hang on to (mainly regarding the electronics)? not sure yet on the motherboard revisions, i'll have to open them up. i'm actually just going to maybe set them aside for now and look into them in a month or two when i have more time. i'd really like to keep both of them if i can.
 

Offline LaserBack

  • Sr. Member
  • ****
  • Join Date: Mar 2007
  • Posts: 345
    • Show only replies by LaserBack
Re: A1200: Commodore or Escom?
« Reply #5 on: May 28, 2007, 11:10:16 PM »
jbuonacc,

escom A1200 motherboards have been modified to support pc floppy drives however lot of floppy games not works there cause that modification....there are a hardware hack fix on aminet for that but I recommend you to keep with the original A1200 motherboard of course...

Insert 3.1 roms on the commodore'A1200  motherboard and keep with that



bye, Laser
 

Offline jbuonaccTopic starter

  • Jr. Member
  • **
  • Join Date: Feb 2007
  • Posts: 94
    • Show only replies by jbuonacc
Re: A1200: Commodore or Escom?
« Reply #6 on: May 29, 2007, 02:16:39 AM »
makes good sense, thanks! did any Escom models ship with 3.0 roms, i don't want to pass it off as something less than it is if i sell it.
 

Offline LaserBack

  • Sr. Member
  • ****
  • Join Date: Mar 2007
  • Posts: 345
    • Show only replies by LaserBack
Re: A1200: Commodore or Escom?
« Reply #7 on: May 29, 2007, 08:22:32 AM »
escom A1200 were made on the years 95,96 and 97 and all ships 3.1 roms...anyways if you wanna sell one but with 3.0 roms it's legal cause it's a working computer and the user who purchase that can upgrade later to 3.1 roms if necesary


bye, Laser
 

Offline jbuonaccTopic starter

  • Jr. Member
  • **
  • Join Date: Feb 2007
  • Posts: 94
    • Show only replies by jbuonacc
Re: A1200: Commodore or Escom?
« Reply #8 on: May 30, 2007, 07:34:48 AM »
thanks again, much appreciated!
 

Offline mosfet

  • Newbie
  • *
  • Join Date: Apr 2005
  • Posts: 9
    • Show only replies by mosfet
    • http://mosfet.no-ip.org/jml/
Re: A1200: Commodore or Escom?
« Reply #9 on: June 01, 2007, 10:45:13 PM »
How to remove my post?
Amiga Rulez
 

Offline guru-666

  • Hero Member
  • *****
  • Join Date: Dec 2006
  • Posts: 587
    • Show only replies by guru-666
Re: A1200: Commodore or Escom?
« Reply #10 on: June 01, 2007, 10:50:40 PM »
keep the commordore sell the escom