Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Mediator Config problem  (Read 1491 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline dbradsTopic starter

  • Full Member
  • ***
  • Join Date: Jun 2006
  • Posts: 117
  • Country: 00
    • Show only replies by dbrads
Mediator Config problem
« on: May 11, 2007, 04:36:52 PM »
Hi All,

 I am trying to configure a Mediator board (LT4) on my A1200T KS3.1, OS3.9, GVP68030 + 8MB, 3GB HD & CD.
 
Each time I run the config program I get a message saying:

 PciInfo program cannot detect your mediator
 Change the mediator jumper

 I have changed the jumper but the message remains the same.

I have cleaned the edge connector, tried with the accelerator  removed and even changed the HD to one with WB3.1. But it is still the same.

 PciInfo version is 1.2 and PciLibrary is version 6.2.

Heeeelp :angry:
Logged
A2000:-
KS sharer3.1/1.3, A2630+4MB, A2091+2MB & 234MB HD.
 

Offline cv643d

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1197
    • Show only replies by cv643d
Re: Mediator Config problem
« Reply #1 on: May 11, 2007, 06:11:58 PM »
Have you connected power cables to the Mediator?
Logged
Amiga articles
"New shell. It was finished a while back, but I still see bugs, haha" - SSolie
 

Offline zyphoid

  • Sr. Member
  • ****
  • Join Date: Aug 2006
  • Posts: 406
    • Show only replies by zyphoid
Re: Mediator Config problem
« Reply #2 on: May 11, 2007, 06:29:05 PM »
now that you mensioned this, I too have a similar problem with mine also saying can't find openpci.library on a few programs that I try to open. I have no clue!  know that it is installed where it needs to be in the latest vers.
Logged
A1200T Mid-Night 060@50mhz tv tuner,voodoo banshee,usb subway,mediator,Dual Multi partition 200Gig 2.5/3.5HD, Twin dual-layer lite-on dvd 52x dvd-rw, sx-32pro030@50mhz my favorite system what xbox came from til someone says otherwise,A500 Efika...
 

Offline dbradsTopic starter

  • Full Member
  • ***
  • Join Date: Jun 2006
  • Posts: 117
  • Country: 00
    • Show only replies by dbrads
Re: Mediator Config problem
« Reply #3 on: May 12, 2007, 06:08:29 AM »
Yes, the power is through the mediator, the system works fine just cant "see" the mediator.
Logged
A2000:-
KS sharer3.1/1.3, A2630+4MB, A2091+2MB & 234MB HD.
 

Offline wurzel

  • Sr. Member
  • ****
  • Join Date: Jan 2007
  • Posts: 273
    • Show only replies by wurzel
    • http://www.wurzel.co.uk
Re: Mediator Config problem
« Reply #4 on: May 15, 2007, 01:28:58 PM »
If you search the yahoo group for Mediator, you will find lots of info relating to this problem.

The main one is that the graphics card isn`t fully home in the mediator. There are suggestions on how to fix this, including using washers to raise the height of the mediator so the card fits in properly.

It worked for me (until I ruined my miigy, see the thread "What have I done to my A1200 ? Aaargh!"

Logged
--
A1200 Power Tower, Blizzard 060 with SCSI, 196mb Ram, Mediator, Voodoo 5500, Spider USB, Hauppage TV, Soundblaster & Fast Ethernet cards, 2gb boot/program drive, 40gb data drive, 40x12x48 CDRW
 

Offline wurzel

  • Sr. Member
  • ****
  • Join Date: Jan 2007
  • Posts: 273
    • Show only replies by wurzel
    • http://www.wurzel.co.uk
Re: Mediator Config problem
« Reply #5 on: May 15, 2007, 01:31:06 PM »
Quote

zyphoid wrote:
now that you mensioned this, I too have a similar problem with mine also saying can't find openpci.library on a few programs that I try to open. I have no clue!  know that it is installed where it needs to be in the latest vers.


Yes, I have that problem "Cannot find openpci.library Vers (1?). Yet I know the correct version is installed. It happens mostly when I try to run Amplifier. Curious!
Logged
--
A1200 Power Tower, Blizzard 060 with SCSI, 196mb Ram, Mediator, Voodoo 5500, Spider USB, Hauppage TV, Soundblaster & Fast Ethernet cards, 2gb boot/program drive, 40gb data drive, 40x12x48 CDRW
 

Offline Chain

  • Hero Member
  • *****
  • Join Date: Jun 2005
  • Posts: 1324
    • Show only replies by Chain
    • http://chain.3dgrafika.cz/aktivity
Re: Mediator Config problem
« Reply #6 on: May 15, 2007, 01:39:12 PM »
Quote

dbrads wrote:

rogram I get a message saying:

 PciInfo program cannot detect your mediator
 Change the mediator jumper

 I have changed the jumper but the message remains the same.


did you change WAIT jumper?
Logged
too lazy to use shift key properly...
 

Offline dbradsTopic starter

  • Full Member
  • ***
  • Join Date: Jun 2006
  • Posts: 117
  • Country: 00
    • Show only replies by dbrads
Re: Mediator Config problem
« Reply #7 on: May 23, 2007, 01:42:56 PM »
Yep, I tried all the jumpers in all the different poitions :-?
I have contacted Elbox and they have asked me to return the mediator to them for testing. Best I do that then!!
Logged
A2000:-
KS sharer3.1/1.3, A2630+4MB, A2091+2MB & 234MB HD.
 
Pages: [1]   Go Up
« previous next »