delfina flipper in A1200 with blizzard 3

[amiga4001]

Trying to connect my delfina onto the internal clockport off the 1200.
Also installed is a blizzard 1230 MK3 with 32MB.
When the blizzard is inserted it doesn't start up anymore.
It gives me a yellow screen and the power light quickly flashes....if I remove the blizzard it boot's up nicely.
Should I go and look for an other turbocard?
Any configs which do work with the delfina?

[Amigaz]

Think someone at a swedish forum had the same problem

The Delfina seem to be incompatible with Cyberstorm MKII cards too

[larsef]

I got the same behaviour with my Microbotics 1230XA, i.e. yellow screen and no booting. If I remove either the Delfina or the turbo card, the computer boots fine. I now have an Apollo 1260 which works great together with the Delfina.

I'm a little bit surprised that your Blizzard card does not work, because I thought this was only an issue with the Microbotics card. I know there are some issues with the clock port on some Escom motherboards, so you might want to investigate that if you have an Escom Amiga.

[amiga4001]

How can I tell iff I have a escom one?
It says commodore and it is a rev 2B.
Always thought that the blizzard range was most compatible with hardware..
Anybody with a mk4 blizzard which works?
Or an other 030 turbocard?

[Matt_H]

If it's a rev 2B, you could be experiencing the infamous "timing problems" - multiple expansions on affected boards seem to trigger the symptoms. Definitely get a second opinion on this before modifying any hardware...

[magistral]

Hi,

I've a delfina flipper with blizzard 1260.
I need those patched libraries. Can you send me one?

Thank you very much.
Regards.

[Flashlab]

I had my Delfina Lite in my 4000 with a CS MK2 and it worked fine. Maybe the Lite works but other flavoiurs of Delfina don't but I just wanted to let you know!

[Crumb]

that looks as badly configured software. My Delphina Lite hanged when loading drivers but using correct versions fixed it.