Welcome, Guest. Please login or register.

Author Topic: SCSI Quantum Fireball TM for Amiga??  (Read 1165 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline jimbo100Topic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2006
  • Posts: 262
    • Show only replies by jimbo100
SCSI Quantum Fireball TM for Amiga??
« on: February 23, 2007, 11:46:27 AM »
I have obtained a couple of Quantum Fireball TM SCSI hard disks. They are marked as following;

2.0GB FBTMS 655-0435
Quantum Fireball TM 3.5 Series

One drive is 2100S TM21S03 Rev 03-B S300Z &
the other is 2100S TM21S03 Rev 04-B S300Z

Now I have plugged them into an Amiga A590 (rev 6.6) and Squirrel SCSI device and HDToolbox finds both devices without problems however when I go to read configurations it reads Manufacturers Name, Drive name and drive revision ok but comes up with a "Cannot read device size!"

I have tried with Kickstart 2.04 & 3.1, both have the same result.

I have searched the internet and can't find any info for cylinders, heads, blocks for tracks etc and any info I plug in always comes up with "Error 29 on write!"

What little info I can find is they are 2.1GB drives with a formatted capacity of 2168.8MB with 4,236,019 logical blocks, 4 physical heads and 2 physical disks.

Does anyone have any experience with these drives. Just want to be able to format and use with my Amiga's!  
 

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show only replies by Zac67
Re: SCSI Quantum Fireball TM for Amiga??
« Reply #1 on: February 23, 2007, 08:46:30 PM »
I remember dimly 6.6 ROMs having a size limit of 2 GB (1 GB?) - if you enter the geometry data manually, not exceeding that limit, it will probably work (e.g. 4096 x 4 x 256).