Amiga 500 3.1 with Amiga Explorer problems.

[notsonic]

well, heres the problem.

i have an amiga 500 with an icd ram expansion. (one of the more involved ones. so i think im around 2 or 3mb.)

my workbench 1.3 disk is pretty fubar so the only thing i could find to replace it with was 3.1 so i picked up that and the rom.

installed the rom (of course i have a rev5 mobo so i had to do some soldering. :-( )

wb3.1 works great, no problems.

but now when i try to do the amiga explorer setup the pc gets an error "error reading from com port" after the RX RAM:Setup step. (when it tries to copy over the amiga explorer file.)

i was able to get this to work in 1.3 but since my disk is so messed up i couldnt format disks or anything. and now that i changed the rom i cant boot 1.3 anymore...

ive also tried copying the files onto an msdos disk and i cant for the life of me figure out how to get crossdos to work.

any help would be greatly appreciated. :-)

also if anyone knows where i can score a harddrive for my 500 id be very appreciative.

[adolescent]

PC0: (the crossdos floppy device) is on your Storage floppy.

[notsonic]

how do i work it?

ive only got the internal disk drive.

i assume i just double click pc0 right?

but then when i pop in a disk it just comes up as df0:? on the desktop

[jimbo100]

notsonic wrote:
i assume i just double click pc0 right?

Yes

but then when i pop in a disk it just comes up as df0:? on the desktop

[/quote]

That is normal, put in a PC formatted DD disk and it will read it.  DF0: is the amiga disk, PC0: is the PC disk.

[notsonic]

when i put the msdos disk in, a PC0 icon should come up on my desktop right?

all im getting is DF0:?

[notsonic]

well i never managed to get crossdos to work.

however i found ADF Sender and the little basic program for the amiga side. works awesome (just a little slow of course.)

adf2disk is great too.


too bad shadow of the beast doesnt seem to work with 3.1 roms.