picasso96 and corrupt pointer?

[amigau]

No matter what I do, I seem to have this weird 'box' attached to the lower right of my pointer on Workbench.  I'm using an A2000 with a CGX64/3D card, Picasso96.  I've played around with Screenmode prefs, etc. to no avail.

It used to be that if I turned off the machine, then waited a minute and turned it back on, the 'artifact' would go away but no more, it seems to continually be getting worse.

thoughts?  I'm thinking it's to do with MUI, a corrupt pointer prefs file or maybe the graphics card/P96 but not sure, can't seem to get rid of it. .. .

kevin orme
amiga university
www.amigau.com

[Sloxa]

there is propably wrong memory settings, in
your env-archive...  

i have same problem in my s3virge card.
then i chance memory settings..and
everything plays well!!!!    :-D

[Framiga]

Hi,

try to remove the gfx card and reinsert it again.
Then remove the VideoRam and reinsert it again.

Ciao!

[amigau]

where in Env-Archive do you mean, and what setting did you change to fix your problem?  I need more specifics - are you talking about one of the P96 settings or something else. . ?

kevin

[Cass]

Did you overclock the gfx card? Check the P96's PVS (P96 Variable Setter), tooltypes (uncheck the overclock, set the memory clock at 55 MHz).

Run the "Pointer" prefs, press right-Amiga&"D" (set default pointer), and save the new setting. Then reboot and check the pointer (might be trashed-corupted the previous prefs file).

Check the hardware itself (how is it inserted? fits right to the zorro slot?)

________
FULL MELT BUBBLE HASH

[amigau]

no overclock was set, clock was already set at 55mhz, messed around with other PVS settings to no avail.

Noticed that if I used 'soft sprite' it seems to 'minimize' the problem, but then it 'smears' over the Workbench when you move the mouse.

Haven't had a chance to remove/reseat the card, will try that later this week.

kevin