I have a bunch of stuff. Cybervision64 (passthrough), Cybervision3D (Zorro II or III, no passthrough, no scandoubler), Merlin (passthrough, Zorro II or III). All tested, working.
Several sets of KS 3.1 for 3000/3000T, I think I have one KS 3.1 for the 500/2000. Both tested, working.
A set of chips to upgrade the 3000/3000T for accel (DMAC, Buster, Ramsey, and SCSI chip, I think, all the updated chips necessary), about 20Meg of ZIP RAM. All tested, working.
A stack of desktop 3000, some work, some have unknown problems. At least one has KS 3.1 chips installed, might have the updated chips installed required for a PPC accel.
The desktop 3000's are mostly buried behind some other stuff so it'll be a while before I can get them out. One that isn't has severe battery leakage. I did find a site that details how to fix MB's that are battery burnt. However, I'd rather not go through all that, I have a new job and other things to worry about. So some of the 3000 desktops are working, some minor problems.
Oh, and a 1200 with 030 and math co at 50MHz, I don't remember how much RAM. 8M Fast? Tested, working.
And... another Cyberstorm PPC, this one with 200MHz PPC, also 68060 at 50MHz and 64MB of RAM, with 68pin UW SCSI cable and active terminator. Tested, working.
I'm in Tacoma, WA, USA. I'll ship outside the US, but it is up to the buyer to get the funds to me in USD by: International Money Order (Japan and Canada), USPS Money Order (US), BidPay (there've been some issues), Western Union, or Moneygram. I don't take PayPal, personal checks, or any other kind of money order or cashier's check.
Some
examples of how I pack things.Everything is sold as-is because I cannot control how you install things. However, I will identify which are known working and which have problems. My eBay ID is polymorph if you wish to check my feedback.
