Author Topic: AdIDE - Internal IDE interface (Read 1602 times)

Astral · « **on:** November 28, 2006, 10:23:47 AM »

Up for auction on eBay...

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120056324369&rd=1&rd=1

jimbo100 · « **Reply #1 on:** November 28, 2006, 11:01:20 AM »

Isnt is broken?

Astral · « **Reply #2 on:** November 29, 2006, 06:51:24 AM »

Yes it is "broken"...but the problem is CLEARLY listed in the description..it should be a VERY easy fix...

Astral · « **Reply #3 on:** November 29, 2006, 06:52:11 AM »

jimbo100 · « **Reply #4 on:** November 29, 2006, 09:00:12 AM »

ok so if it's not an easy fix as you state, full refund available?

A1200Power · « **Reply #5 on:** November 29, 2006, 01:41:22 PM »

Yes it is easy to fix !!!

Had the same problem but there is something else you should consider. IdeAD44 sucks chip memory because it needs to be loaded. Make sure you have 2mb chipmem to make it work nice.

Greetz

jimbo100 · « **Reply #6 on:** November 30, 2006, 09:02:39 AM »

Might not be that easy, also suggestion that several other pins are fragile...

Author Topic: AdIDE - Internal IDE interface (Read 1602 times)

Astral

AdIDE - Internal IDE interface

jimbo100

Re: AdIDE - Internal IDE interface

Astral

Re: AdIDE - Internal IDE interface

Astral

Re: AdIDE - Internal IDE interface

jimbo100

Re: AdIDE - Internal IDE interface

A1200Power

Re: AdIDE - Internal IDE interface

jimbo100

Re: AdIDE - Internal IDE interface