I'm back as well

[RobPotts]

Hi,

After 8 years with my amiga gathering dust at my paretns house I'm soon to move to a bigger house and will be bringing it down and starting to ue it again.  My system is a classis A1200 with a 80mb hard disk, with 8md memory upgrade if memory serves.

Just a couple of questions:
What do I need to add a bigger HD ~10GB
What do I need to add a CD-rom
What do I need to add a standard PC monitor

Thanks in advance and in the mean time I'll be searching the archives to help with these answers.

Rob

[McVenco]

Welcome back!

What do I need to add a bigger HD ~10GB

You could best use SmartFileSystem (SFS in short) - available on Aminet. You can also find a link in the newsitem about SFS on the frontpage of this site (as long as it's there at least).
I'm still trying to figure out SFS myself (I'm not much of a technical miracle so I still don't understand what I'm doing :-D ) but it's the best way to use harddisk larger than 4 GB (and it's free).

What do I need to add a CD-rom

Depends on what you want. You can put an internal slim CD drive in your A1200 case, using the internal IDE controller. You can also buy a Squirrel SCSI controller, or a turboboard (e.g. Blizzard 1230 with SCSI controller), and add an external drive. You can also find yourself a nice towercase in which you can put pretty much any CD-Rom drive that exists. The possibilities are endless :-)

What do I need to add a standard PC monitor

You will need at least a scandoubler, and preferably a flickerfixer so you can display interlaced screenmodes without any hassle.

I suggest you should take a look at the photoalbum on this site - look for the Hardware Amiga 1200 section - it will give you plenty of ideas what other users have done to their machines and it may give you an idea on what you want. It helped me a lot with my cooling mods for instance...

Cheers,
Eric

[amigakit]

Welcome back!

[KThunder]

What do I need to add a standard PC monitor

You will need at least a scandoubler, and preferably a flickerfixer so you can display interlaced screenmodes without any hassle.

actually you will need at least a vga adapter. you can do without a scandoubler/flickerfixer if you can fin a monitor that will sync at 15khz nec3d is good but old there are others including commodore ones.

that results in a pretty pitifull image though all scanliney and such thats why a sd/ff is highly recommended. or an a3000 :-D  or video card

[McVenco]

KThunder wrote:

actually you will need at least a vga adapter. you can do without a scandoubler/flickerfixer if you can fin a monitor that will sync at 15khz nec3d is good but old there are others including commodore ones.

He said "standard pc monitor". There almost almost no standard pc monitors which will do 15 kHz. That's why I mentioned the scandoubler :-)

[orange]

What do I need to add a standard PC monitor

.. a lot of cash.

[SamuraiCrow]

Welcome back from me too!