Author Topic: VRAM for Cybervision 64 (Read 2716 times)

JohnFante · « **on:** September 06, 2006, 08:34:32 PM »

Does anybody know where you can buy ekstra VRAM for a Cybervision 64 card?

More precisely I was wondering if it is "standard" VRAM that you can buy in your local electronics shop.

I must admit that I have so far been to lazy to check it out my self.

Thanks in advance!

TjLaZer · « **Reply #1 on:** September 06, 2006, 09:04:09 PM »

I went to a PC junk store and used some chips from an old PC VGA card 4MB, the ones that have 2MB soldered on board and 2MB in sockets. Works great!

Bazzaq · « **Reply #2 on:** September 06, 2006, 11:00:42 PM »

Buy an old 4mb s3 virge pci or similar off ebay.. you should be able to pop out half the mem.. They usually have half soldered and half socketed..

TjLaZer · « **Reply #3 on:** September 06, 2006, 11:56:58 PM »

Hmmm it feels like Deja Vu.

JohnFante · « **Reply #4 on:** September 07, 2006, 05:07:48 PM »

Thanks!

Did a little searh on ebay. But so far no luck finding cards that have socketed VRAM. All is soldered.

If anybody here has 4x512KB VRAM i would be very interested.

Thanks in advance!

Bazzaq · « **Reply #5 on:** September 09, 2006, 11:15:38 PM »

This is the sort of thing with them soj memory chips..

Ebay

TjLaZer · « **Reply #6 on:** September 10, 2006, 03:40:55 AM »

Wrong type but close you want a card that has 2MB onboard with 4 more sockets for 2MB more...

http://amiga.resource.cx/photos/cybervision64.jpg

Evillord68 · « **Reply #7 on:** September 10, 2006, 09:00:35 AM »

I have 2 MB Ram from the original Cybervision64.
If you want, contact me.

Author Topic: VRAM for Cybervision 64 (Read 2716 times)

JohnFante

VRAM for Cybervision 64

TjLaZer

Re: VRAM for Cybervision 64

Bazzaq

Re: VRAM for Cybervision 64

TjLaZer

Re: VRAM for Cybervision 64

JohnFante

Re: VRAM for Cybervision 64

Bazzaq

Re: VRAM for Cybervision 64

TjLaZer

Re: VRAM for Cybervision 64

Evillord68

Re: VRAM for Cybervision 64