KCS Powerboard & HD_DRIVE

[Cass]

I`ve installed a HD floppy (taken from an A4000) to my A500+.

The last time I tried to boot the KCS floppy instead of the mem check & bios MSDOS prompt, it showed a black screen with green fonts, the status line below (time etc.) and a strange message:
[/quote]
PLEASE PUT THE SWITCH ON THE KCS HD_DRIVE IN THE MIDDLE POSITION AND RESTART
[/quote]

I tried to disable floppies from the PC-Preferences program, but the screen came up with the same message.

Does anybody here know what it means, or how can I see the MS-Dos prompt?
________
Model b (1904)

[InTheSand]

Hi,

Would the KCS board and/or controlling software know about HD floppy drives or HD floppies? My old board predates the use of HD drives in Amigas by a good couple of years!

I guess you have a more recent board, judging by the cryptic message you received...

Can you boot to an MS-DOS prompt with it using 720Kb DD disks?

 - Ali

[Cass]

[/quote]
Can you boot to an MS-DOS prompt with it using 720Kb DD disks?
[/quote]

Unfortunately no, I get this screen message.

I`ve found the old original disk, which boots nicely to the well-known bios ram-test & MSDOS prompt. I`ve used an online version diskimage of the KSC software, dumped to a floppy.

It`s been a long time since I had to boot to MSDOS, and it was probably a newer version than the one I got with the board.

________
Honda airwave